my 97 ram 360 4x4 will not start. i have checked the starter and it's fine. when i run direct power to the ignition wire the truck starts. i have run a test light at the relay and when the key is turned a signal is sent. now is this a park neutral switch problem or is there something else i'm missing. please help

 

[align=left]same thing happened to my 96 and all i had to do was replace the ignition and it was all set
[/align][align=left] [/align]

 

o.k but what part of the ignition. i'm gettting an ignition signal at the relay so i'm not to sure what part your refering too.