2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bolt on HorsePower

Thread Tools
 
Search this Thread
 
  #11  
Old 01-28-2010 | 12:14 AM
Safetguy's Avatar
Safetguy
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 9
Likes: 0
Default

Ok, I read the articles on roller rockers and am familiar with them. The question now is, how much improvment am I going to get by installing roller rockers?
 
  #12  
Old 01-28-2010 | 12:15 AM
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

About 15-20 horsepower. By reading the threads, you should know!
 
  #13  
Old 01-28-2010 | 12:24 AM
Trey318's Avatar
Trey318
Captain
Joined: Apr 2008
Posts: 723
Likes: 0
From: Galveston, Texas
Default

He has a 5 speed so hopefully the transmission won't be too much of a worry.
 
  #14  
Old 01-28-2010 | 12:59 AM
Safetguy's Avatar
Safetguy
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 9
Likes: 0
Default

PurplDodge,
I thought I was loosing my mind by missing the part about the gain in the article.
You sad quoting:
About 15-20 horsepower. By reading the threads, you should know!
So I went back and looked through the article to see where I missed it and came to the conclusion that I did not miss it, because it is not there. So, thank you for that little sarcastic jab you sent my way.
 
  #15  
Old 01-28-2010 | 01:03 AM
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

Originally Posted by Safetguy
PurplDodge,
I thought I was loosing my mind by missing the part about the gain in the article.
You sad quoting:
About 15-20 horsepower. By reading the threads, you should know!
So I went back and looked through the article to see where I missed it and came to the conclusion that I did not miss it, because it is not there. So, thank you for that little sarcastic jab you sent my way.
I'm pretty sure it was mentioned in the first thread I posted.
 
  #16  
Old 01-28-2010 | 11:19 AM
torp74's Avatar
torp74
Professional
Joined: Jul 2009
Posts: 207
Likes: 1
From: South Texas
Default

Originally Posted by Safetguy
Hello To All,
New to this forum and am enjoying reading the post's.
......................
Any thoughts?
Yep. I'm thinking it is time to pick up a new [used] truck. You can find a 1999-2002 2500 model for between $8-12k. I bought mine back in July for quite a bit less than that, but I got very lucky on the deal. One thing nobody is talking about here is braking. You might be able to get that trailer up the hill ok with bolt-on HP, but good luck stopping it. Thats where the damage is done.

Do a little risk management...is the benefit of fixing up that good old truck with 180,000 worth the risk?

I'll bet you can find a nice 2500 Cummins with less than 75k for the money you are looking at.
 
  #17  
Old 01-28-2010 | 11:50 AM
Gav1n8's Avatar
Gav1n8
Veteran
Joined: Aug 2008
Posts: 310
Likes: 0
From: Alma, AR
Default

^^^ By far the best answer. And I agree with it completely.
 
  #18  
Old 01-28-2010 | 12:41 PM
dsertdog56's Avatar
dsertdog56
Record Breaker
Joined: Sep 2005
Posts: 1,822
Likes: 0
From: Just south of nowhere in Oklahoma
Default

Originally Posted by torp74
Yep. I'm thinking it is time to pick up a new [used] truck. You can find a 1999-2002 2500 model for between $8-12k. I bought mine back in July for quite a bit less than that, but I got very lucky on the deal. One thing nobody is talking about here is braking. You might be able to get that trailer up the hill ok with bolt-on HP, but good luck stopping it. Thats where the damage is done.

Do a little risk management...is the benefit of fixing up that good old truck with 180,000 worth the risk?

I'll bet you can find a nice 2500 Cummins with less than 75k for the money you are looking at.
I agree too, my post got overrun though. And I forgot to mention stopping. Like I said before, pulling through flatlands and rolling hills are easy...
 
  #19  
Old 01-29-2010 | 12:30 AM
Safetguy's Avatar
Safetguy
Thread Starter
|
Registered User
Joined: Jan 2010
Posts: 9
Likes: 0
Default

Thanks for the information. My initial thought was to put $5,000 to $10,000 into the truck because it is in good shape and I like it. Maybe I will rethink since the braking issue came up.
 
  #20  
Old 01-29-2010 | 04:34 AM
JackJ's Avatar
JackJ
Captain
Joined: Nov 2008
Posts: 742
Likes: 0
From: Virginia Beach, VA
Default

If you are that worried about stopping, aquire a brake controller and electronic setup for the trailer, as long as you stop smartly and dont ride the brakes they will be able to hold up. Just make sure you use quality brake parts.

It don't matter how big a truck you got inertia will win every time, Newton had it right when he put that law first.
 


Quick Reply: Bolt on HorsePower



All times are GMT -4. The time now is 11:14 PM.