When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
i didnt know i had a LSD for almost 3 years after i bught the truck and so i never used the addative. mine lasted about 2 and a half years with no additive. it blowing a clip is how i found out i had one
i didnt know i had a LSD for almost 3 years after i bught the truck and so i never used the addative. mine lasted about 2 and a half years with no additive. it blowing a clip is how i found out i had one
Time for foolish question - - - - What additive are ya'll referring to?
Hmmm, on that page 3 of the applications chart for Dodge ---
I'm going to believe you are correct and East Coast is mis-labeled....
Originally Posted by merc225hp
I was hoping you were on to something there, Oh well.
I see no reason why one couldn't use that locker on the 2nd gen trucks.
Nothing changed between the axles that I know of between generations. It's still an AAM 9.25 rear end. UNLESS some bearings and stuff changed. Because the 3rd gen LSD was the same sh1tty design as the 2nd gen LSD, I would have thought they were the same axle.