3rd Gen Dakota general discussion This section is for general discussions about your 3rd gen Dakota. Non tech related Dakota threads belong here.

its been a while fellas

Thread Tools
 
Search this Thread
 
Old Sep 24, 2012 | 01:16 AM
  #1  
varnerhba's Avatar
varnerhba
Thread Starter
|
Veteran
Joined: Jun 2011
Posts: 453
Likes: 0
From: Orange County, CA
Default its been a while fellas

well i wanna let you all know im still here, been going threw some rough times but those rough times are OVER. long story short im getting into a new house and will be back to work shortly, in the mean time here is a little ear candy and tommorow some eye candy.....

i have learned alot about my dakota in the last couple of months, i learned that it will overheat in vegas at 113 degrees outside. I also learned that the 180 thermostat wasnt giving me ANY advantage over the stock thermostat. another thing i learned is that the earlier model dakotas from 02-04 i believe have the same front end suspension, and the rear is the same i believe to, just different lugs, i plan on doing a disc brake upgrade soon. I have been doing alot of researching on tuning and computer controls and so fowardth but here is what i have done lately to the vehicle.

BeCool Aluminum dual core Chevy style radiator
Stant 195 Thermostat (stock)
F and B Billet 72mm Throttlebody
Sherradon Stage III Valvebody
Mopar Solenoid Pack (updated version)
Superchips Transmission Tuning w/ custom modified shift points (i spent 3 tanks of fuel getting these down, WOAH is it a difference)
SCT Programmer with Customer hemifever tune

I also reworked my whole exhaust, I put catalyc converters back in and ran the pipes around the transmission, with 2 cutouts before my xpipe. She sounds so good and with all the items ive added lately it has been running liek a dream, especially for 192xxx miles on it. I have some more stuff in mind but right now i need to get moved and start back up at work since i got my job back oh yeah and its for me on the 30th.

but tommorow i will post pictures of everything, and i plan to get a dyno done on the car, and take it to the track to log some data. next on the list:

cams
forged rotating assembly and bored block with ross pistons
456 gears
rear disc brakes
rear shocks with resiviors

good night all

good to be back
 
Reply




All times are GMT -4. The time now is 10:59 AM.