amp help
#1
amp help
i have 4 alpine type R's being pushed by a clarion with a max output of 400W... i feel like they are only getting like 30 watts each they sound like crap.... what do you suggest for a bigger amp? i think i need more like 800W max power.... basically i need 75W RMS to each speaker so they might sound a little better. plus i need something that will fit under the back seat. suggestions?
#2
RE: amp help
Go to www.crutchfield.com They have really good cutomer service. They can help you out with anything. You can callor email them.
#3
RE: amp help
I say call crutchfield....
Then go to www.sonicelectronix.com to find an amp that fits your requirements...
What is your size limit?? What is the size of the amp you have currently? How much room DO you have to mount an amp? If you can get the measurements, I'm sure I can, or someone on here, can find you a NICE amp, that'll fill your requirements. :-)
Then go to www.sonicelectronix.com to find an amp that fits your requirements...
What is your size limit?? What is the size of the amp you have currently? How much room DO you have to mount an amp? If you can get the measurements, I'm sure I can, or someone on here, can find you a NICE amp, that'll fill your requirements. :-)
#5
RE: amp help
I personally like this one... http://www.sonicelectronix.com/item_...s+CD4.4LE.html
If there amps are anything like there speakers, this amp should be perrrrrrrfect for you.
If there amps are anything like there speakers, this amp should be perrrrrrrfect for you.
#6
#7
Guest
Posts: n/a
RE: amp help
well, I am assuming they are the new type Rs that require betweeen 50 and 100 rms... so with that said, I suggest a JL 300/4 or an alpine MRP-F450
Links to manufacturer webs...
Alpine:
http://www.alpine-usa.com/US-en/prod...model=MRP-F450
JL:
http://mobile.jlaudio.com/products_amps.php?amp_id=254
Both of these amps will be plenty of clean power to them... I also question the output clarity of the kenwood... you might also look into a nice signal processor...
something to look into would be audiocontrol for the processor... (The EQX series can be found for pretty cheap on ebay now days...)
Links to manufacturer webs...
Alpine:
http://www.alpine-usa.com/US-en/prod...model=MRP-F450
JL:
http://mobile.jlaudio.com/products_amps.php?amp_id=254
Both of these amps will be plenty of clean power to them... I also question the output clarity of the kenwood... you might also look into a nice signal processor...
something to look into would be audiocontrol for the processor... (The EQX series can be found for pretty cheap on ebay now days...)
Trending Topics
#9
Join Date: Mar 2007
Location: Turn down the heat please
Posts: 11,333
Likes: 0
Received 1 Like
on
1 Post
RE: amp help
ORIGINAL: habeba86
Why do you say this????????
ORIGINAL: superdak05
it is better to get two small amps than one big amp.
it is better to get two small amps than one big amp.