people with electrical knowledge...
Thread Starter
|
Banned
Joined: Dec 2003
Posts: 0
Likes: 1
RE: people with electrical knowledge...
I explained to him your way about pos in pos out, he was like wtf??? you have two pins, one is for the positive wire to come in with, one for it to go out with, I was like, Nathan.... that's what I JUST WROTE!!!!!
He goes, Oh ya, I'm retarded..
Good times.
He goes, Oh ya, I'm retarded..
Good times.
Guest
Posts: n/a
RE: people with electrical knowledge...
haha... I am glad I didnt get to answer this one... I was like. Oh come on frenchy...
but let me ask this... You are hooking it up to run on high with the switch. is it just running off a switched power source?
but let me ask this... You are hooking it up to run on high with the switch. is it just running off a switched power source?
Guest
Posts: n/a
RE: people with electrical knowledge...
I am assuming the fan is running as long as the truck is... thus being hooked up to a switched/ignition power source. the setting is obviously low when the truck is just running... I will just assume these statements are true... ;-)
Thread Starter
|
Banned
Joined: Dec 2003
Posts: 0
Likes: 1
RE: people with electrical knowledge...
Oh, ya... when the key is in the ON position the fan is always running...kinda cool... easy way to cool the motor off after a little drive...
:-)
Turn it to high, and about 3 minutes later, she's cool enough to touch! :-)
:-)
Turn it to high, and about 3 minutes later, she's cool enough to touch! :-)