Napa Part # for 180 thermostat?
#1
Napa Part # for 180 thermostat?
Ok, what's the correct Napa part number? I went to two local Napa stores and asked for both 530800 and 530080 combinations that I've seen in older posts. Both didn't show up in their system. I've just tried using those numbers in the online store and it couldn't find it either. Leads me to believe that's the wrong #.
Looking for it put a dent in my schedule today. So I had planned on: thermostat, mark 180 temp on stock gauge, install efan and controller, and install water temp gauge. But I missed out on the thermostat.
Better yet. post a link to napa's online store with correct part # searched.
Looking for it put a dent in my schedule today. So I had planned on: thermostat, mark 180 temp on stock gauge, install efan and controller, and install water temp gauge. But I missed out on the thermostat.
Better yet. post a link to napa's online store with correct part # searched.
#3
Guest
Posts: n/a
RE: Napa Part # for 180 thermostat?
The stat wont show up as a dakota stat... because it isn't a direct fit. you will have to cut a notch in it to make it work right.
I have an extra one that my cousin got for me, If you cant find one, let me know. I will ship it over to ya. I think its 6 bucks at napa.
I have an extra one that my cousin got for me, If you cant find one, let me know. I will ship it over to ya. I think its 6 bucks at napa.
#5
RE: Napa Part # for 180 thermostat?
0, 180 stat is for the 5.2-5.9 motors. but it is the same sige for the 4.7. the books dont cross refence with the 4.7. here is a pic of them left is the factory one with the notch and the right is the one you need to cut the notch out of. just remove the factory gasket from the factory stat and place it over the new one. these stats are cheap 5.00. compared to others that go for 40.00
[IMG]local://upfiles/31284/4CF741E7A7B544E0BFBA4A7F6382C42F.jpg[/IMG]
[IMG]local://upfiles/31284/4CF741E7A7B544E0BFBA4A7F6382C42F.jpg[/IMG]
#7
Guest
Posts: n/a
Trending Topics
#8
RE: Napa Part # for 180 thermostat?
Picked it up today but I missed out on installing it...ran into some issues getting my fan controller to work. In the end found out it was my fault. Left an unused wire unprotected and kept shorting it out...oops. I'll have to do this next weekend or so.
#9
RE: Napa Part # for 180 thermostat?
ORIGINAL: superdak05
left is the factory one with the notch and the right is the one you need to cut the notch out of.
[IMG]local://upfiles/31284/4CF741E7A7B544E0BFBA4A7F6382C42F.jpg[/IMG]
left is the factory one with the notch and the right is the one you need to cut the notch out of.
[IMG]local://upfiles/31284/4CF741E7A7B544E0BFBA4A7F6382C42F.jpg[/IMG]