ive noticed there arent any double din adapters for a touch screen deck or anything other than a flip up or single din. i found this site here and it specifies our years. but than says must be equipped with Nav radio? does that mean from the factory it must be equipped or thats what needs to go in?

im dying for a double din touch screen but not wanting to modify my dash peice. check this out and let me know if its a go or not.

thanks

click here

 

the reason it says nav ready, is cuz look at the sides of that, and then compare to the sides of the ones w.out nav... the nav ready ones, dont have the half circles on the sides...

 

in other words i would need the bezel out of a nav ready dakota? or is there a way to mount a double din into our daks with those half circles?

 

ya, itll just look like hell, unless you modify the one w/out the nav ready.

 

wait what... it will look like hell getting a nav ready bezel and put a double din in there? or it will look like hell modifying the one without nav ready?

 

second one...

 

Just modify yours and try it, if it comes out bad you can always buy the nav ready bezel

Could also go the MyGIG route like I did

DSC00422.jpg

 

Just make sure ya measure twice and cut once. Dont pull an Altair and measure once and cut twice...err something like that. What a Tard!

 

if you have a tweeter store by your area, they carry what you are looking for

 

does any body have the part number for the nav ready bezel? I looked on dodgeparts.com but I can't find the part numbers for the regular silver/wood grain bezel or the nav ready bezel.