Well fellars
91' Talon TSi
http://i107.photobucket.com/albums/m...l/DSC00023.jpg
http://i107.photobucket.com/albums/m...l/DSC00029.jpg
http://i107.photobucket.com/albums/m...l/DSC00040.jpg
2.4L block and crank
-Wiseco pistons
-Eagle Rods
-Balance Shafts Removed
-SI s.s. 1mm oversized inconnel valves
-SI Dual Valve Springs
-Brian Crower 280 camshafts
-Cometic Head Gasket
-Headsupporting Stage 5 port, polish, flow-bench tested
-Turbonetics T3 Exhaust manifold
-Garrett T3/TO4E 57 trim turbocharger
-Dejon Tool Race Front Mount Intercooler
-Tial 38mm wastegate
-Tial 50mm blow-off valve
-DSM Link V2
-MSD DIS 2 Ignition
-JMF Coil on plug assembly
-ACT 11lb. Flywheel
-ACT 2600 6-puck Clutch
-Removed A.C.
-Removed Power Steering
On street tires, in 3rd gear @ 45mph, I can roll into the throttle from 3000rpm and spin the tires until I hit around 70mph.
http://i107.photobucket.com/albums/m...l/DSC00023.jpg
http://i107.photobucket.com/albums/m...l/DSC00029.jpg
http://i107.photobucket.com/albums/m...l/DSC00040.jpg
2.4L block and crank
-Wiseco pistons
-Eagle Rods
-Balance Shafts Removed
-SI s.s. 1mm oversized inconnel valves
-SI Dual Valve Springs
-Brian Crower 280 camshafts
-Cometic Head Gasket
-Headsupporting Stage 5 port, polish, flow-bench tested
-Turbonetics T3 Exhaust manifold
-Garrett T3/TO4E 57 trim turbocharger
-Dejon Tool Race Front Mount Intercooler
-Tial 38mm wastegate
-Tial 50mm blow-off valve
-DSM Link V2
-MSD DIS 2 Ignition
-JMF Coil on plug assembly
-ACT 11lb. Flywheel
-ACT 2600 6-puck Clutch
-Removed A.C.
-Removed Power Steering
On street tires, in 3rd gear @ 45mph, I can roll into the throttle from 3000rpm and spin the tires until I hit around 70mph.



This ought to be good... a talon, dak, and a strat woooooo