Maybe Front End?
I was going to add this to the other thread about the front end, but it has since been closed, sorry to make a new thread but I have a question.
I have been realizing then when going over pot holes, or any holes for that, it seems like my truck wants to go all over the road way. Does anyone else have this problem, or know what might be causing this?
Thanks in Advance Guys
btw for those who dont know me on here, I have an 05 Dakota.
I have been realizing then when going over pot holes, or any holes for that, it seems like my truck wants to go all over the road way. Does anyone else have this problem, or know what might be causing this?
Thanks in Advance Guys
btw for those who dont know me on here, I have an 05 Dakota.
My truck did this when new. After a few 1,000 miles it stopped. My front struts were very "tight" and the rebound was very "severe".
After the "break in" period for them, it rides fine and the "automatic lane changing" has stopped.
I can duplicate this now if I run too much air pressure in my tires. I have found for myself and the tires I am now running, 42PSI works best. Any more PSI and it will "dart" all over the road.
As for the rears, I have Bilsteins on there and I would not trade them for anything else currently available.
Here is the Bilstein part # F4-BE5-6682-H5 These are the 5100 Series. SEE NOTES BELOW
NOTE 1 : Make sure you order the correct size bushings and metal inserts for the ends or the bolts will be loose.
Note 2 : The part number listed above is ONLY for a truck with 1.5"-2" blocks in the rear.
Stock ht. trucks will need a different shock. I don't have that number in my head, but I can get it again if need be.
After the "break in" period for them, it rides fine and the "automatic lane changing" has stopped.
I can duplicate this now if I run too much air pressure in my tires. I have found for myself and the tires I am now running, 42PSI works best. Any more PSI and it will "dart" all over the road.
As for the rears, I have Bilsteins on there and I would not trade them for anything else currently available.
Here is the Bilstein part # F4-BE5-6682-H5 These are the 5100 Series. SEE NOTES BELOW
NOTE 1 : Make sure you order the correct size bushings and metal inserts for the ends or the bolts will be loose.
Note 2 : The part number listed above is ONLY for a truck with 1.5"-2" blocks in the rear.
Stock ht. trucks will need a different shock. I don't have that number in my head, but I can get it again if need be.
She has a myspace toooooooooooo...
Hes lazy... wtf Frenchy
Thread Starter
|
Veteran
Joined: Oct 2007
Posts: 371
Likes: 0
From:
hey jamey...you have my myspace silly
i figure it was the front shocks...who knows, this thing is damned near cursed haha
tire pressure is never fully inflated and the truck is just passed 50,000...and its been having this problem for foreveeeeeeeeer
thanx again guys
i figure it was the front shocks...who knows, this thing is damned near cursed haha
tire pressure is never fully inflated and the truck is just passed 50,000...and its been having this problem for foreveeeeeeeeer
thanx again guys