Graythang, isn't that what you said about Graythang I?

That's what happens when you give secound chances. It is hard enough to buy American made and when you do you get burned. Doing the right thing is not always the right thing. My bad.

If I remember correctly,don't you have an HO motor gray? If so you need to run 3922's they are a heat range colder than the 23's that should help out alot

OK I havn't install them yet (rain all day) so I'll take them back & get the 3922s. What the hell anything worth a try at this point. Thanks

What about fuel filter? How many miles do you have on your truck? Might be worth looking into as well. Maybe clean the TB.

another thing to try, get intouch with the dealer and see if there are any updates that the truck needs. when superchips destroyed my pcm, dodge had to reflash my pcm and they said there were new updates that they installed. 92.00 for the reflash with new updates. you may need this done

There are no fule filters are there? if so don't tell me there in the tank. I did clean the TB and all sensors. I will ask the dealers about ECM updates. They should do updates free. Its not like we can down load these and just plug in the laptop and install them.

Well I won't tell you that but the service manual might:

FuelFilter1.jpg

FuelFilter2.jpg

FuelSystemDepressurize.jpg

Let me know if you want me to post up the tank removal.

Thanks. That not going to happen. They just couldn't done this the old way with a seporate filter under the hood? If it ends up being the tank filter then I'll live with it and sell her in next year as is. I'm not dropping any extra money in thing anyway from here on out.

I havent had any flat spots with my 07...it pulled hard even before I tuned with SC.