so as some of you may know I had the crazy thought of putting 35s on after level kit and body lift which probably won't be till the winter. will it fit? now I've already been told the gears may not pull it Ithink im running the 355s would a step up help. this any other input would be nice thanks in advance

 

4.10s should be okay but I've heard with 35s you may want a beefier axle

 

from what i have read the 4.10 will be even and it will take some much needed trimming i think to fit 35s if they fit will i get a set yes lol but i dunno if they will

 

Well from what i read 4.52 gears would be like stock tires with 38 inch tires, So most likely 410s would be fine. Idk how the CV shafts would do. Idk how strong they are. And they would prolly run on the frame

 

Do it! u would be the first one here with 35's. As for the cv axles. You'll be fine just mall crawling. Wheeling depends on what you do. Probably wouldn't last long under just mild off road especially if you change the gears. I used to explode front cv's on my Toyota all the time on 33's so 35's on a Dak? I'm real curious to see it though.

 

lol thanks pig yeah im kinda hesitant now seems like a lotta work not that im afraid of it just more than I wanna do at this point but ill see what it looks like after the lifts are in.. and no she's not a mall crawler lol

 

once you blow your CV's, are there upgraded ones available so you don't do it everytime you go out wheeling?

 

not that I've heard of yet iv already gone through one set under warrenty and its gotta so back maybe ill ask when it hoes in this time pay the difference if they'll let me

 

i have true 33"s and i dont think you can go high enough to clear 35,s without cutting the rear of the front fender completly off! id love to see you do it but its not possible.... thats unless you dont care about cosmetics..... or you invent some new front end suspension components.... get to work!