Brenthel Industries brenthel@gmail.com
Giant Motorsports gfalzy@hotmail.com

 

so funny story amongst my mass emailing. I stumbled across tuff country face book page. they had a contest going on for the ttc all I had to do was comment on a photo. well I won a t shirt when the messaged me for my mailings info I mentioned the interest on our daks. I included the thread in a separate message. did I mention this guy is in the marketing department lol this may be of interest to him haha

 

Here are some prices for the different parts I will be offering:

$3400 2WD kit includes: new upper, lower A-arms, coil over shock, and lengthen steering adjusters


$1650 2WD & 4WD kit includes: New upper A-arms and coil over shocks

I will cover the install cost on your truck.

 

I now have a CAD file of this model truck to start designing both the kits, so we need 5 or more of you to contact me and place your orders so we can get started.

I’m also meeting with Deaver springs this week to work out the detail on get the replacement pack in production.

Giant Motorsports
714-265-1450
gfalzy@hotmail.com

 

Looks like it is a battle among the company's now to see who make the better kit

 

mine is 4x4,will this be for the front only?, i take it it will include drop brackets for the lower a-arms, diff drop, and steering rack drop?

also... i would be perfectly happy using the original struts with a spacer if that can be done

 

What is comes with is stated above.
I'm not going to offer a spacer.

Here is one you can get.
http://www.readylift.com/c-53-dodge-...d-only-20.aspx

 

wait... this will be a 3'' lift with nothing more than a coil over and an upper a-arm? chassis tech tried that, and it simply will not work with a 4x4, the cv's wont take the angle or the extra needed length for the lift, the diff and the steering rack need to be droped, thats the same problem we all have now...

 

Sorry I did not mean to put the 4WD on that list, I'm going to open up the CAD fill to see if it has all the 4WD parts in it to do the diff and lower arm drop.

 

would you be able to post a blueprint of the stock lower arm measurments? like balljoint distance and mount to mount and all that?