Tie down in bed?
Heres what I have .....
Up by the cab:
IMG_20110206_143711.jpg
I just have one by the tailgate in the bed, not sure if its a tie down:
IMG_20110206_143810.jpg
Then I have one of these on each side by the tailgate:
IMG_20110206_143816.jpg
Up by the cab:
IMG_20110206_143711.jpg
I just have one by the tailgate in the bed, not sure if its a tie down:
IMG_20110206_143810.jpg
Then I have one of these on each side by the tailgate:
IMG_20110206_143816.jpg
hmmm weird... never would have guessed that. Does anyone with a 2006 have the one in the bed floor.
Btw Those front hooks would be handy there... how are they attached? Obviously a bolt or screw system, but how?
Btw Those front hooks would be handy there... how are they attached? Obviously a bolt or screw system, but how?
Last edited by lghtngblt02; Feb 7, 2011 at 10:37 AM.
perfect! thanks for the pics, my rear ones are accessible but they didn't cut any holes for the front ones. time to cut the bedliner some more!
They are mounted the same exact way as the rear are mounted. The only difference is that it is mounted flat against the bed side. The hole in the bedliner starts at 6 3/4 inches height from the bedliner floor, and about 1/2 inch from the front of the bed.

100_1291.jpg

100_1291.jpg
Last edited by dakotaff; Jul 23, 2015 at 07:02 PM.
They may or may not be already installed in your 07. It would be really stupid if they covered them up with a bedliner, but it is definitely possible.
hmmm I wonder if they are like rivet nuts or something behind them in the bedside...or are they just nuts...
You can probably figure out how the rear ones mount, the fronts should be the same. Or you could go for a simple fix like this.
http://www.bullyclamp.com/
http://www.bullyclamp.com/










