Rack and pinion photos and dimensions
cool beans! the tie rod measurements attribute to both 2 and 4wd but your help with the cv will definitely allow 4wd guys to use projekt dirt equipment 
oh yea one more question i forgot to ask....with the male threads being 5/8 long...how deep is the ram threads? say if i were to use a 1" long 24mm stud. would it go all the way into the ram?
Thanks again
oh yea one more question i forgot to ask....with the male threads being 5/8 long...how deep is the ram threads? say if i were to use a 1" long 24mm stud. would it go all the way into the ram?
Thanks again
You know what, I did not take a measurment on the internal thread depth, didnt really cross my mind. I also did not get a measurment of the diameter that the inner tie rod nut has to be in order to fit into the recessed opening.
Record Breaker
Joined: Sep 2008
Posts: 1,084
Likes: 5
From: Las Vegas
i dont need exact depth of the internal part. just wanted to know if all i had to work with was 5/8? and what do you mean the nut for the recessed part? to go into the body of the rack? i dont think the ram travels that far anyway.
Well the old rack has already been returned, sorry I needed the core deposit back to pay rent.
I think the ram travels farther than you think. You can check that yourself by pulling the boot.
I don't know the depth, but I am sure you can go a little more than 5/8", but do not know.
I think the ram travels farther than you think. You can check that yourself by pulling the boot.
I don't know the depth, but I am sure you can go a little more than 5/8", but do not know.
Record Breaker
Joined: Sep 2008
Posts: 1,084
Likes: 5
From: Las Vegas
ok you must have some crazy hardware stores in your area. i cant find an m24x1.5 bolt ANYWHERE lol