I am going to order the parts to try and replace the whole front end supspension done but want to make sure im not missing anything. i got: balljoints, control arms, shocks and struts, and sway bar links and bushings. if anyone can think of anything else im missing please let me know. thanks

 

outer tie rod ends

 

Camera

 

beer...lots of beer

 

Oh & I just read today to use 08+ bushings as they are thicker & fit the older 3rd Gens too.

Using mobile site so I can't see sigs or garages so not sure how this may apply to you.

 

plenty of bandaids or bandages.

 

I was just thinkin i might be able to get away with out doin the control arms. Do yall think its a necessary component to change out?

 

Lower control arm should not really need to be replaced, unless damaged. The upper control arm should be replaced if the ball joint is gone.