3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

water-methane injection

Thread Tools
 
Search this Thread
 
Old May 3, 2012 | 10:24 AM
  #1  
Designer's Avatar
Designer
Thread Starter
|
Rookie
Joined: Jan 2012
Posts: 71
Likes: 0
From: Columbus, OH
Default water-methane injection

http://www.snowperformance.net/index.php

anyone ever look into this?
 
Reply
Old May 3, 2012 | 10:54 AM
  #2  
lghtngblt02's Avatar
lghtngblt02
The RAM Administrator
Joined: Jan 2008
Posts: 9,647
Likes: 12
From: Lemoyne, Pennsylvania
Default

Nope, I do know a handful of people whom have the setup on Turbo and or Supercharged Setups though...
 
Reply
Old May 3, 2012 | 12:21 PM
  #3  
thunder98110's Avatar
thunder98110
Champion
Joined: Mar 2009
Posts: 4,084
Likes: 6
From: DC
Default

for boost yes, if you are N/A, not worth it. I talked to hemifever about it and he said that for the 4.7 there is only so much your can advance and see a gain in HP, the methanol wont do anything other than keep the engine clean, for N/A that is.

hemifevers email:
The timing that these run already won't give you but a few more hp getting more aggressive. Advanced timing doesn't always mean more power with every config. Cams and heads will generally respond to more timing before a stock engine would. but no, I don't have any body messing with meth injection to get more timing on stock n/a engines. It makes a ton of difference on diesels but some folks have done it and not gotten rave results.
 

Last edited by thunder98110; May 3, 2012 at 12:26 PM.
Reply




All times are GMT -4. The time now is 01:31 PM.