found it. any way. It has been while since I've posted progress. It's funny how "life" gets in way of playing with toys. I have the motor sitting in the truck. Now I'm messing with the wiring part. then on to getting hoses and lines made plus the exhauste. Hope the link works since i refuse to pay photobucket $400 for 3rd party sharing.

https://photos.app.goo.gl/BrZGugrS1gXqoCK13

 

There is actually a browser plugin (for chrome, and firefox, at any rate.) that makes photobucket work again. At least, for the most part.

 

Could always use imgur, usually what I do and without an account. Also, that's a fairly large engine to be fitting in...

 

It’s still in the second gen Dakota section.

 

Looks like the third gen section to me........

 

Well shoot....was in 2nd gen last night.....

 

Migrating threads.

 

Thanks to who moved this to 3 gen section. Not much to take picture so far. When I get time, I've been working on the wiring part. So far, I have more or less cleaned out the connectors that aren't going to be used. Plus side, I shouldn't need anything from the black/green plug since that is transmission stuff. The awesome things is. Most of the pins are the same between ECMs.

 

Moved the 3rd gen Dak and made sticky (:

 

Have you made any more progress on this so far? Very interested in getting a good write up, thought about doing this myself.