3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

Plugged connector under hood question

Thread Tools
 
Search this Thread
 
Old Jul 7, 2018 | 11:39 PM
  #1  
bobafett's Avatar
bobafett
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 19
Likes: 0
Default Plugged connector under hood question

Hey, I have been absent from the forum for a decade or so, but I question.....hehe..



have an 05 Dakota I use to putt around town and had a question for you guys, (I did a quick forum search but it is a hard “question” to nail down in a search)

anywho, so I was under the hood today and noticed a unused two pin connector just resting on my front bumper, I did a quick chase back and it branched off where my existing fog light harness is located...any ideas?

SLT trim level so I know it doesn’t have every option, I just can’t figure out what a Laramie would potentially need to hook up out front, or why it exists at all and is stubbed out.

I included two pictures, a close up as it exists on my Dakota and a stock photo I fetched off the introwebs (allpar I believe). In that specific photo you can see the connector in question located just in front of the radiator. Driver side.

thanks in advance.
 
Reply
Old Jul 8, 2018 | 08:59 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,198
Likes: 363
From: Winston Salem, NC
Default

Temperature sensor for the outdoor temp display on the overhead console, if you have one.
 
Reply




All times are GMT -4. The time now is 04:47 PM.