Here are a couple of more shots. The first one in a pic from the left rear looking forward. The tire sticks out about an inch past the mud flap in the front.

This one is the rear.

I think it looks just right. The stock fitment is inset too far. Even my winter wheel/tire set is further offset than the stock setup.
Hope this helps, if you have any other questions, just let me know.

 

Thank you for the new pictures. Has been really helpful.

But I have one question, do you think the 20x10 could fit in the front ???

Or it would hit the inside...

Thanks.

 

The 20 X 10 will not fit in the front. The tire needed would be too wide.

 

I was told by town fair tire that U can't do staggered fit on awd. can anyone confirm or deny?

 

Well I didn't knew that, but my ride is RWD ! so no prob.

Actually im not really convinced of getting the SRT wheels now. I think im gonna get a different brand.

Like Giannelle Yerevan on 20's or 22's dont know yet. I know they are a lot more expensive than those Factory SRT Rep, but better to expend more on something that looks really nice. thats my opinion.

Those are 24'' too big lol, but 22 isn't a bad idea. The picture is too big, don't know how to make it smaller.

 

You can run a staggered fitment, you just have to make sure the tires are going to have the same runout. I have awd and have not had any issues at all. There are different tires that will work and other brands that will not.
Here is a calculator to use:
http://www.1010tires.com/tiresizecalculator.asp
My tires come in at 683.5 revs per mile for the front, and 683 revs per mile for the rear.