Can someone photoshop a set of Viper Reps on my whip? I'm thinking of going with gloss black and putting a red line around them. I think they'll look good with the graphics. Also, I've seen people post that they are putting 22's with a +35mm offset, but I can only find them with a +50mm offset. The 20's have the +35, but no 22's that I've found do. Where did you get 22's with the +35?

 

Picture is in my alblum. Not sure how to get the big one in here...

 

I did it myself. Here is another members white Durango with about 3" of the rear spring cut off and black 22's. I put the red ring that I will put on them and my side graphics. Need to do the same thing with the springs apparently to get the desired look. Thoughts?

 

As far as I know the 22x9 is ET35 and the 22x10 is the ET50...give Dennis at DD Mods or Factory Reproductions a call directly andf they can get you squared away.. hope this helps, good luck!!

 

CMil - any reason you went with the 22x9's as opposed to the 10's? I was thinking I might be able to run the 10's with 305's...

 

At the time I ordered the 10's weren't avaible but we have a few guys running the staggered set ups. Apparently the 10's with 305's is a very tight fit out back so be wary of going that route...definitely research it further...good luck!

 

Photoshop looks good, The red pin stripe on the wheels is a nice touch. Go for it !

BTW, you can only run the 22x10's in the back with a 295 tire to be safe and 22x9's up front with a 265, 275 or 285 tire the 10's will rub at full turn.

 

Wicked. On the practicle side, how does it ride? Firm? Extra firm? Or NASCAR?

 

What goes around comes around. Our brand new 1967 GTO had F70-14 Firestone redline tires. Reproductions still made today. Unfortunately they were like driving on potato skins....

 

[QUOTE=salrt;3041663]I did it myself. Here is another members white Durango with about 3" of the rear spring cut off and black 22's. I put the red ring that I will put on them and my side graphics. Need to do the same thing with the springs apparently to get the desired look. Thoughts?

Man this looks great, I want to say originally when I looked at factory reproductions they were available like this on the site but not any more, I was considering it too. I like the look and the graphic at the side looks great too. Another option too ive noticed you can buy wheel skins on ebay(vinyl) and add your own stripes and take off the repos if ya don't like em. Good luck man.