3rd Gen Durango 2011+ models

Supercharger Project

Thread Tools
 
Search this Thread
 
Old Sep 9, 2013 | 03:34 PM
  #61  
sbindley's Avatar
sbindley
Thread Starter
|
Professional
Joined: Dec 2011
Posts: 174
Likes: 1
Default

Up and running. Check the FB link I gave to Cordes' shop for some video. Tune upcoming
 
Reply
Old Sep 9, 2013 | 04:03 PM
  #62  
MJNewman's Avatar
MJNewman
Captain
Joined: Jan 2012
Posts: 570
Likes: 2
From: Orlando, FL
Default

sounds good dude!
 
Reply
Old Sep 9, 2013 | 07:41 PM
  #63  
CMil527's Avatar
CMil527
Champion
Joined: Mar 2012
Posts: 3,560
Likes: 1
From: Old Bridge,NJ
Default

Awesome news!
 
Reply
Old Sep 9, 2013 | 09:52 PM
  #64  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

Sounds good cant wait to see Dyno results after tune
STEVE
 
Reply
Old Sep 11, 2013 | 12:20 AM
  #65  
sbindley's Avatar
sbindley
Thread Starter
|
Professional
Joined: Dec 2011
Posts: 174
Likes: 1
Default

Many more updates on Cordes FB page. Tune tomorrow...
 
Reply
Old Sep 11, 2013 | 08:23 PM
  #66  
MJNewman's Avatar
MJNewman
Captain
Joined: Jan 2012
Posts: 570
Likes: 2
From: Orlando, FL
Default

Moment of truth!
 
Reply
Old Sep 11, 2013 | 10:20 PM
  #67  
sbindley's Avatar
sbindley
Thread Starter
|
Professional
Joined: Dec 2011
Posts: 174
Likes: 1
Default

Dyno vids and all that on Cordes FB page. 400 rwhp, 439 torque -- super smooth and linear powerband. No noise in cabin at idle, barely audible whine at throttle. Just awesome.

Recall that this dyno was 280 stock. Joe says there are prob an easy 20-30 more if pushed for peak number, but this is the safe, 120 desert heat on stock internals, 22 inch wheels, and 91 octane. (Also, this is the low boost kit (7.5 pounds). 12 psi kit is there for those more adventurous). He said he had to cut the rev limit by 500 rpm as the SRT-8 fuel pump was starting to struggle with full boost at the max rpms.

Looking forward to driving more. Install is absolutely a piece of art.
 
Reply
Old Sep 11, 2013 | 10:30 PM
  #68  
V for Victory's Avatar
V for Victory
All Star
Joined: Feb 2013
Posts: 750
Likes: 0
From: Falls Twp. PA
Default

Nice job Scott, just looked at the FB page and love it. 120hp is exactly what Maggy advertises for the charger TVS. So they nailed it! must feel awesome under the right foot. You might want to look at a fuel pump booster just as precaution or not your choice. Love it and want one too. maybe the people at Maggy are paying attention and will build a kit and tuner for all of masses to enjoy. Congrats and happy motoring!

Now go out there and find a JGC SRT8 to run down and make the driver wonder what just happened to his 70K, 470hp, SUV!
 

Last edited by V for Victory; Sep 11, 2013 at 10:50 PM.
Reply
Old Sep 11, 2013 | 10:40 PM
  #69  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

STock it had 22% drivetrain loss so 400 x 1.22 = 488crank hp that is a 128hp on 7.5lbs of boost that is awesome. if you ran 10% you may have a 30% hp gain or 520 crank hp 160 more than stock
btw 488 crank hp is more than an SRT8 jeep
STEVE
 
Reply
Old Sep 11, 2013 | 10:40 PM
  #70  
FSTDANGO3's Avatar
FSTDANGO3
Champion
Joined: Nov 2006
Posts: 2,541
Likes: 0
From: NORTH JERSEY
Default

I would rather have them do all the work, they made it look easy!
STEVE
 
Reply



All times are GMT -4. The time now is 11:02 PM.