OE Wheels 5 star 20" X9" SRT reproduction, see in signature

 

Many of the online reproductions have a disclaimer that they wont fit the SRT model. That is because the 2006-2010 SRT8 Jeep Brembos IN FRONT would not clear. So over time when the newer 2012-2014 came out as well as us with Durango's we all thought they wouldn't fit. Well they do. I have been talking with a 2009 owner that has the same wheels and they just rubbed the powedercoat off but thats a bit to close so he runs a 3MM 1/8" spacer. The 2011-2015 Durango/2012+ JGC they have 5/16" .330" or about 4 MM of clearance.

http://www.oewheelsllc.com/Wheels_3/...2#.U-E1LWMufw4

" Fits: Jeep Grand Cherokee 99-14, Commander 06-10. Dodge Durango 11-14, Journey 09-14. Chrysler Pacifica 04-08. Fitment guaranteed for Stock Equipped vehicles only. Will NOT fit SRT vehicles or vehicles with larger brake calipers like Brembo."

 

Any chance you could get a measurement of same location of calipers to wheel with the stock calipers?

 

I just measured and would ballpark it at this.

From the absolute center of the caliper anti rattle clip straight out 1.25" minimum i have to my rims. this is the area of closest contact to the Brembo caliper.

This old picture depicts it but i wasn't coming off the caliper correctly.

 

So...the brembos fit behind the replica SRT wheels. Will the Brembos fit behind the stock 2014 R/T 20" wheel?

 

Yes on the SRT replicas DEF NOT on the stock.

 

So has anyone done a brake upgrade with the Viper replicas? Somewhat curious what will fit behind them.

 

From what I've read they wont fit behind the viper rep's!

 

They will not fit behind Viper Reps
STEVE

 

What they said. Viper reps have well over an inch of interference.