I just had the factory hitch installed. As you know, all R/T's came with the "tow package" even if the hitch was not installed. So when the hitch was installed, all the wiring, etc, was there. However, there is no mention of "load leveling" anywhere on my build sheet. It mentions the trailer sway system. So for those of you with a build sheet and the factory tow package, can you tell me if "load leveling" is mentioned on the sheet and what the code is? I searched the forum and came up with this thread, but it doesn't directly answer my question. Thanks in advance.
https://dodgeforum.com/forum/3rd-gen...-leveling.html

 

My Build sheet says both the trailer sway system and Load leveling rear suspension
Is yours a 2wd?
STEVE

 

SESP Rear Load Leveling Suspension .....off my build sheet

 

All 13 R/T come with all the items that make up the trailer tow package. Except the Hitch , and the hitch comes with the rear bumper cutout. you need the 7/4 way plug for the harness and have the dealer activate the harness in the computer.

I had this added to mine after lots of research. After the dealer activates the harness the Chrysler data base is updated and your durango is classified as having the tow package

 

How about deleting the factory hitch? How difficult would it be to track down the non-cutout bumper?

 

Thanks. Of course it was right there on my build sheet. Heehaw, heehaw....gotta learn to read slower....

 

Heehaw...I used to watch that show! "You met another and pttthhhhtthhh, you were gone..."