LED lightbar functionality
#21
11-02-2014, 01:52 PM
1. I feel like it is quite sterdy! It came with the mounting equipment and I just put some bigger washers underneith the bumper. You can grab the led bar and lift the front end up a bit with minimal flex. But definitely not towing from it well say that.
2. No issues with any sensors.
3 I took off the bumper there are forums on here how to do that and then I drilled two holes in the bumper which the bolts went through to hold it on. Ran the wire through the grill into engine bay and wired her up with a relay of course.
I highly recommend you do this led mod first the bar works amazingly well at lighting up the ~160 degrees infront of the vehicle. The 32inch curved led bars are the only ones that will fit in the bumper
http://m.ebay.ca/itm/400796978088?nav=SEARCH
Because of the grill you have to cut a bit out of the heat exchanger like I have below
2. No issues with any sensors.
3 I took off the bumper there are forums on here how to do that and then I drilled two holes in the bumper which the bolts went through to hold it on. Ran the wire through the grill into engine bay and wired her up with a relay of course.
I highly recommend you do this led mod first the bar works amazingly well at lighting up the ~160 degrees infront of the vehicle. The 32inch curved led bars are the only ones that will fit in the bumper
http://m.ebay.ca/itm/400796978088?nav=SEARCH
Because of the grill you have to cut a bit out of the heat exchanger like I have below
#22
01-18-2015, 10:22 AM
#23
01-19-2015, 11:08 AM
The light bar is holding on fine to where I mounted it as seen in the photos on page one. Use washers on the bumper to increase strength. You have to cut a bit of the heat exchanger out to allow for the crosshair grill which extrudes out abit over the bumper.
Last edited by Thekoning; 01-20-2015 at 10:08 AM.
#24
05-21-2018, 09:46 PM
Registered User
Bumping this.
The link to the eBay posting is dead, but I found this instead from Amazon:
At first glance, it seems to be exactly the same as the one you used, though the specs may be slightly different.
I just bought a 2011 DD Crew and I'm thinking of doing this mod to it, in addition to the RR lift and resonator delete.
Wish me luck!
The link to the eBay posting is dead, but I found this instead from Amazon:
At first glance, it seems to be exactly the same as the one you used, though the specs may be slightly different.
I just bought a 2011 DD Crew and I'm thinking of doing this mod to it, in addition to the RR lift and resonator delete.
Wish me luck!
#27
09-06-2018, 03:53 PM
Veteran
Join Date: Mar 2013
Location: Long Island, NY
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
mine fit fine no cutting
this is where I got my light from
https://www.ultrabrightlightz.com/ub...d-scene-light/
and wiring harness
comes with all the wires and relay all wired up
https://www.ultrabrightlightz.com/ub...iring-harness/
worth the money
https://www.ultrabrightlightz.com/ub...d-scene-light/
and wiring harness
comes with all the wires and relay all wired up
https://www.ultrabrightlightz.com/ub...iring-harness/
worth the money
#29
12-06-2018, 02:12 PM
