When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there an issue with the fitment where the hood meets the headlight meets the fender? It looks like the hood was designed for the 2012 headlight and that the 2014 may be slightly different. Not trying to nit-pick but it looks like there is approximately 1/2 inch of misalignment (?)
Last edited by FrankADavisJr; 09-24-2014 at 02:59 PM.
Is there an issue with the fitment where the hood meets the headlight meets the fender? It looks like the hood was designed for the 2012 headlight and that the 2014 may be slightly different. Not trying to nit-pick but it looks like there is approximately 1/2 inch of misalignment (?)
that's not a nit pick that's a pretty big deal imo!
Something is wrong with your mounts then. It shouldn't stick out at all. Should line up with the fender.
i looked through a 2014 photo thread on another durango forum, and i reckon atleast 90% of the 2014s look to have a hood that stuck past the fender, not sure if this was by design, because the headlights have a notch for it.
I had to loosen the hinge bolts on mine and align it properly the day I brought it home from the dealer....but I did t have any trouble getting it flush