What is the deal with the cams? Why are they on national backorder?

 

My bad, you already got exhaust.

So skip that.

 

Because the company that grinds the H/o cams which all of the other 4.7 performance cams are "re-ground" from stopped grinding them because of "no demand for the product." At-least that is how I understand all of it.

 

I find it hard to believe that there is no demand for those cams.

 

i have a 2005 dakota with the 4.7 all my mods are listed, 180t stat, napa part 530080, 410 gears from presicion gearing, 4 x 4, k/n intake with the iat sensor relocated, e - fan, single 3 inch catback exhaust with a larger y-pipe, sct tuning by marty from krc performance, hemi 125 shot of nitrous, 70 mm tb from dan the fastman. 206 cams also from marty, there are a few sites to check out, airram.com and krcperformance.com, both are great people and their tuning is alot better than sc or hypertech, also i have pics in my gallery

 

Thanks for the great information. I do have a superchips tuner, that I didn't really see a difference with, but I did resize my tires a little which helped with the shift points.

I also cut my exaust off right at my CC. Added a glass pack with a turn down for a little back pressure. This seemed to have helped performance quite a bit.

I don't understand the Y-Pipe thing. I assume you are talking about for the exaust, but I don't see a Y-Pipe.

 

heres a decent intake for the money the ebay ones are to cheapo imo....
http://cpwstore.carpartswholesale.co...S-V218205.html
i got this one and i like it and i agree with everything oe football said....

 

Here is a stock Y pipe

here is an aftermarket Magnaflow y pipe



and here it is installed.

 

Does anyone know if you can use the Superchips 3865 on more than one vehicle? I've heard that you can only use it on one vehicle, but not sure. I have a 4.7L and my brother has the hemi, can we share one?

 

actually i have one, and i would like to know for sure too, cuz i was told i should be able too, cuz i am putting a hemi in place of my old 4.7, so i also have a new computer, and i wanted to use my superchips again to re-tune the hemi's computers, so does anyone know for sure, ill know as soon as my harness is done, but that might be a few days till i get the swap done!