That thing came out looking good.

 

when you run a CAI with a diablo tuner do you run a stock tune or should you modify one.

 

The PCV valve is not in the oil filler neck, but the hose that comes out of there is the crankcase breather, we both just put a little filter on the end of it.

I run the Diablo 93 tune with no mods to the fuel or spark with my CAI and I did data-logging and have no KNK.

I run 93 fuel with no ethonal

 

Awesome, thanks. My Filter should be here this week so I'm going to get going on it this weekend hopefully

 

Sorry but whats data logging and KNK? I put my DS on mostly to adjust my speedo and I dont mess with the performance end of it.

 

Data logging is what you can do with the diablo. It basically logs info on your computer as you drive. at WOT you should have no KNK (engine Knock). There are Knock sensors on the truck, and basically if it is running too lean it will knock and it will register and be recorded.

As I said with my CAI and 93 tune I had no Knocking at all, so you should be fine, especially if you are running the 91 tune

 

Evomega, love the color of your truck. I normally don't like red but that thing looks friggen sweet. I have never seen this color around here. Anyway KNK is knocking and data logging is just what it sounds like, using your Diablo tuner to log data. Here is a link to what you can do.. http://www.diablosport.com/beta/Pred...17_MenuMap.pdf
Go on Diablo's web page for more info. But if all your using your tuner for is tires size and speedo adjustments your missing out on a ton of power.

 

I'm going to have to do some research into this thanks for the advice.

 

Looks great!! Is there a specific kind of paint you guys use for the PVC?

 

Big horn, would you mind posting the size of the pieces you used for this...