I am looking for an exhaust system for my Ram 1500 4X4 QC Hemi Sport. I want the exhaust note of a 8 cylinder, but I don't want something that is going to get annoying and nothing too loud at idle/low RPM's (upper end is ok) (I have a 454 Chevelle, and if I want loud, I go sit in that). So, who makes the best exhaust and has the V8 rumble, but not nothing too loud? Preferably cat-back.

I was also thinking about just putting in a new muffler. I am not really interested in who makes the best power gains, just looking for the sound. So, what if I took a flowmaster/borla/ect muffler and bolted it on instead of the stock one? Sound like its feasable or am I going to mess somtehing up with the computer? Any help would be wonderful,
Chris

 

Borla or Gibson side swept

 

I went to RAYCO To in Wilmington Delaware. Not A BRAND NAME SYSTEM . cost $391.00 PURRRRRRRRRRR'S REAL NICE THOUGH. You should hear it when I stomp it and it shift's gears.;Sweeeeeeeeeeeeeeeeet.

 

if you just want the sound the cheapest way to go is to jsut replace the muffler, buy one off ebay for maybe $50-$70 i did that on my old suburban instead of replacing all the piping.

 

if u want a nice rumble with out the annoyance of LOUDness then juts remove the resonator. i did that it rumbles nice but isnt annoying.

 

I went with a magnaflow system and I really like it. It has a deep throaty rumble when you get on it, but shuts down pretty good on the highway so it doesnt have an annoying drone. Im sure you could just get a muffler if you didnt want the whole system, i just wanted pipes out the back so I went that way.

 

I had the Borla Dual Exhaust cat backs installed a week ago, exiting behind each wheel, It sounds really great, quiet but ever so noticeable at idle but when you stomp on it, it does make a nice roar, not defening but it's nice.
I have a video of it if you want me to send it to you.

 

Could you send me that video? I would appreciate it (RedSS454Chevelle@aol.com)

Also, if I remove the resonator, do I just throw in another peice of pipe? If so, what size are the pipes? Thanks,
Chris

 

RedSS454, video sent, I made sure I edited out me without my pants down in the back bed of the truck [8D]
hehe, I wouldn't mind taking your Chevelle for a drive as a courtesy
Enjoy

 

yea just throw another piece of pipe. the size is 3" .. 3" stock