Installed some N-Fab bars
#1
Installed some N-Fab bars
Well it was much needed as jumping in and out was getting old. Got them on last night and step worked out to be perfect height. Now getting the old nerf brackets that were still on truck sucked. Three brackets the bolts just spun. So I split the nuts on first one. Which worked out ok. Trying to get done quicker I used a sawzall to buzz off nuts for next two brackets. Blades didn't like it much and went thru 3 of them. Last bracket I lucked out and bolts didn't spin and 1/2" rachet was enough to snap nuts off. Was so much easier installing the new bars. Think I had everything marked and drilled and bolted in place in 15 minutes.
Lil closer
Also had to replace tailpipe rubber hangers on both sides. I knew they were split but figured they would make it to weekend. Nope the both broke on way home from work yesterday.
Lil closer
Also had to replace tailpipe rubber hangers on both sides. I knew they were split but figured they would make it to weekend. Nope the both broke on way home from work yesterday.
Last edited by Mistwalker; 07-15-2010 at 06:01 PM.
#7
Trending Topics
#9