New tires and wheels!
Thread Starter
|
Professional
Joined: Mar 2007
Posts: 218
Likes: 0
From: RDU, NC
Thanks! Leveled, yes. Backspacing is 4.75
Thread Starter
|
Professional
Joined: Mar 2007
Posts: 218
Likes: 0
From: RDU, NC
i think the bumper is ok for now....i would do the gas cap first, since it would be the easiest and cheapest....Plasti-Dip is $6 a can and would match your wheels well. Also check these out. ramman got them for $95 a peice....pretty good pricing
https://dodgeforum.com/forum/3rd-gen...eadlights.html
doing the cap and the headlights. i think you would be set man. oh and do the hemi badge too...that would look sick
https://dodgeforum.com/forum/3rd-gen...eadlights.html
doing the cap and the headlights. i think you would be set man. oh and do the hemi badge too...that would look sick
I'm gonna look into the Plasti-dip, that seems cheap and easy enough to do. I def think the gas cap needs to change. Thanks for the suggestions!
All Star
Joined: Jun 2008
Posts: 963
Likes: 0
From: Greenville, SC
I saw a thread in another forum where the dude did his own headlights, oven-baked and painted the housing black, including the turn signal and the other amber light, looked sick as hell!! Way nicer than Night Runners. But, man it took that guy over 8 hours to do start to finish. and I dont have that kind of time nor am I even close to competent to do something like that on my own.
I'm gonna look into the Plasti-dip, that seems cheap and easy enough to do. I def think the gas cap needs to change. Thanks for the suggestions!
I'm gonna look into the Plasti-dip, that seems cheap and easy enough to do. I def think the gas cap needs to change. Thanks for the suggestions!
Thread Starter
|
Professional
Joined: Mar 2007
Posts: 218
Likes: 0
From: RDU, NC
Hey, I saw a past thread where you plasti-dipped a bunch of stuff. Did you apply the plasti-dip to the items while still on the truck? Also, I noticed the stuff comes in aerosol or a can, which one did you use? You got me thinking about this, and I wanna do my gas cap and my steps for sure, but I was wondering if I can leave them on to apply. Thanks!
All Star
Joined: Jun 2008
Posts: 963
Likes: 0
From: Greenville, SC
The aerosol can....i took the steps off to make sure i got even coats....the gas cap i took off as well....but my cover is just a stick on....i will be changing to a new one all together. but it would take you all of an hour to pull the steps off and the cap and the hemi badges and paint them.
Thread Starter
|
Professional
Joined: Mar 2007
Posts: 218
Likes: 0
From: RDU, NC
The aerosol can....i took the steps off to make sure i got even coats....the gas cap i took off as well....but my cover is just a stick on....i will be changing to a new one all together. but it would take you all of an hour to pull the steps off and the cap and the hemi badges and paint them.
Thread Starter
|
Professional
Joined: Mar 2007
Posts: 218
Likes: 0
From: RDU, NC
Last edited by theHemiBeast; Oct 1, 2010 at 09:38 PM.
