Nightrunner headrests
Nightrunner headrests
They are finally on there way,I cannot wait for that beautiful brown truck!!.
They are here and installed!!W00 hoo
They are here and installed!!W00 hoo
Last edited by rocket23; Oct 18, 2010 at 02:17 PM.
Myosinner on dt hooked me up. with making this possible. Well here is the diy on headrest changes,
First get your self another set of headrests!
remove the originals, There is a small tab press in and extend headrest, after the last catch, keep lifting and pressing till the side is clear of the last catch. Next on the other spindle, there is a hidden release button. press and remove headrest all together. here is a picture of the hidden button.
After the removal, now the fun begins. These are injection molded headrests. which means they were easy too make, pita to take apart and put back together. I had too wash the replacements so this had to be done. First unclip the plasti sleeve.
Now shimmy the cover off one corner at a time a little at a time.
When done with the washing machine, replace the oem's with the replacement covers, again a little at a time. Note: because of the injection molding re insert the plastic then put the cover back on, it's a lot easier imo.
Again one corner at a time. not fun.
When complete another mod well worth the aggrevation!!
First get your self another set of headrests!
remove the originals, There is a small tab press in and extend headrest, after the last catch, keep lifting and pressing till the side is clear of the last catch. Next on the other spindle, there is a hidden release button. press and remove headrest all together. here is a picture of the hidden button.
After the removal, now the fun begins. These are injection molded headrests. which means they were easy too make, pita to take apart and put back together. I had too wash the replacements so this had to be done. First unclip the plasti sleeve.
Now shimmy the cover off one corner at a time a little at a time.
When done with the washing machine, replace the oem's with the replacement covers, again a little at a time. Note: because of the injection molding re insert the plastic then put the cover back on, it's a lot easier imo.
Again one corner at a time. not fun.
When complete another mod well worth the aggrevation!!
Last edited by rocket23; Oct 19, 2010 at 10:16 AM.
gotta be a nice match; They came off another nightrunner lol. A real hard find imo. These emblems did not grow on trees. I searched high and lo. silverbullit came thru for me and myosinner hooked me up.
Record Breaker
Joined: Jan 2010
Posts: 1,060
Likes: 0
From: West Virginia
Trending Topics
Until another nightrunner comes along,less mine and the one that got picked apart,in Idaho.1,998 left. lol. Not counting the prime srt's in which there were only 400 made. But mine is a 4x4,there's isn't, 
All Star
Joined: Jun 2008
Posts: 963
Likes: 0
From: Greenville, SC
Im with you on the 4x4, but something can be said about those trucks and that power.....i would trade in a heartbeat if i found one i could afford. a SRT-10 quad cab that is.