3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Changing Plugs...need your opinion please

Old Feb 9, 2012 | 08:53 PM
  #1  
ricer's Avatar
ricer
Thread Starter
|
Veteran
Joined: Feb 2011
Posts: 420
Likes: 0
From: zanesville ohio
Default Changing Plugs...need your opinion please

I am going to change my plugs in my 2006 1500 QC SLT 4x4 that has a 4.7 and I need help/opinions on which plugs to put in. I have pretty much narrowed it down to the Champion Coppers or the Autolite 3923's. Any and all input would be greatly appreciated.
 
Reply
Old Feb 9, 2012 | 09:44 PM
  #2  
MikeHTally's Avatar
MikeHTally
Champion
Joined: Aug 2007
Posts: 4,702
Likes: 2
From: N. Florida
Default

I've bought a lot of Champion plugs over the years - never bought a good one. Look into the NGKs or Bosch. The NGK might be a 5306. That's the one the Hemi uses. Perhaps the 4.7 uses the same.
 
Reply
Old Feb 10, 2012 | 10:40 AM
  #3  
xtremedurb00's Avatar
xtremedurb00
Rookie
Joined: Jul 2011
Posts: 60
Likes: 0
From: Nokomis, IL
Default

I'm not totally sure on the 4.7s but, I would stick with NGK, Champion or Bosch...I'm running NGK V-Power and I love them and haven't had any problems. These are the ones that most people are running but, check this out if you have any questions...https://dodgeforum.com/forum/3rd-gen...ark-plugs.html
 
Reply
Old Feb 10, 2012 | 12:44 PM
  #4  
Brandon Anderson's Avatar
Brandon Anderson
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

Bosch 7962 are the OEM replacements.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:34 PM.