3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Wheel swap question

Old Mar 19, 2013 | 02:00 PM
  #1  
Shawn Selzer's Avatar
Shawn Selzer
Thread Starter
|
Registered User
Joined: May 2012
Posts: 15
Likes: 0
Default Wheel swap question

I am thinking of swapping out my factory 20 with a a set of factory 17 i currently have 275-60-20 on my 04 1500 4x2 hemi possie rear. going to change to a 245-70-17 due to the fact there free. what im worried about is doing damage to the rear or trans. Any thoughts would be helpful.
 
Reply
Old Mar 19, 2013 | 03:07 PM
  #2  
hemi4109's Avatar
hemi4109
Veteran
Joined: May 2012
Posts: 405
Likes: 0
Default

Don't see why it would cause any damage as that's what my truck came with from the factory. If anything it's a good size since the stock 30.5" tires are subtantially smaller than most who are running 32-33" + tires giving you a nice overall drive ratio even if you have a 3.55 rear end. This will help your tranny by taking some strain off of it, will make the truck seem more powerfull by driving the rpms up a bit and you'll probably see a mpg gain while you're at it too.
 
Reply
Old Mar 19, 2013 | 03:22 PM
  #3  
04HemiGreg's Avatar
04HemiGreg
Record Breaker
Joined: May 2009
Posts: 1,130
Likes: 1
From: Eastern, NC
Default

Shouldn't hurt anything but it will throw your speedo off.
 
Reply
Old Mar 19, 2013 | 07:00 PM
  #4  
Shawn Selzer's Avatar
Shawn Selzer
Thread Starter
|
Registered User
Joined: May 2012
Posts: 15
Likes: 0
Default

Thanks for the input guys, just did the swap see how it goes.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:33 AM.