3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

performance exhaust

Thread Tools
 
Search this Thread
 
Old May 22, 2014 | 04:16 PM
  #1  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default performance exhaust

im looking to get an exhaust i just want single pipe...but i want most performance out of it ...someone give me some help please
 
Reply
Old May 22, 2014 | 04:28 PM
  #2  
dbrenneman's Avatar
dbrenneman
Registered User
Joined: May 2007
Posts: 1
Likes: 0
Default

You have the superchips tuner with trans program Chris? I have it and it makes a big difference. I had magnaflow 18 inch and flowmaster 40. The magnaflow was better for me. The flowmaster lost bottom torque for me. It sounded good but so did the magnaflow. I had dual pipes after muffler.
 
Reply
Old May 22, 2014 | 06:21 PM
  #3  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

right now i have CAI and diablo 93 octane tune im changing the thermostat when i have time to 180 and should be installing e fan and pulley kit and maybe even the throttle body swap
 
Reply
Old May 23, 2014 | 08:52 AM
  #4  
ewing111's Avatar
ewing111
Captain
Joined: Aug 2011
Posts: 723
Likes: 8
From: Dublin, OH
Default

how much are you looking to spend? How much do you want to change? You could get rid of the crappy y pipe, then go to a 16-18" magnaflow will give you some small changes for pretty cheap.
 
Reply
Old May 23, 2014 | 10:18 PM
  #5  
Old Man with a hemi's Avatar
Old Man with a hemi
Veteran
Joined: Jun 2012
Posts: 400
Likes: 0
From: Woodbury Tn
Default

Originally Posted by ewing111
how much are you looking to spend? How much do you want to change? You could get rid of the crappy y pipe, then go to a 16-18" magnaflow will give you some small changes for pretty cheap.


^^^^^This is exactly what I would do.....Magnaflow Y pipe 29.95 muffler 50.00 to 100.00 and you have a good exhaust for cheap
 
Reply
Old May 26, 2014 | 10:30 PM
  #6  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

i dont want to spend more then like 500 thats my budget for now but i dont want no junk either...i would love to have magna flow
 
Reply
Old May 26, 2014 | 10:32 PM
  #7  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

Originally Posted by ewing111
how much are you looking to spend? How much do you want to change? You could get rid of the crappy y pipe, then go to a 16-18" magnaflow will give you some small changes for pretty cheap.
any suggestions on the y pipe i should get and will it be bolt on because i donot know how to weld and what muffler should i buy i dont care about the noise as long as im getting the performance
 
Reply
Old May 26, 2014 | 10:51 PM
  #8  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

Originally Posted by ewing111
how much are you looking to spend? How much do you want to change? You could get rid of the crappy y pipe, then go to a 16-18" magnaflow will give you some small changes for pretty cheap.
what style muffler like oval or round or offset or what
 
Reply
Old May 26, 2014 | 11:05 PM
  #9  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

if you guys wouldnt mind helping me out if you know any of the part numbers that i would need for the y pipe and mufflers i would appreciate it greatly thank you ..
would the new muffler and y pipe bolt up to stock piping or what?

2008 ram 1500 hemi 4door short bed
if you needed to know all that
 
Reply
Old May 26, 2014 | 11:12 PM
  #10  
Urban Hunt MD's Avatar
Urban Hunt MD
Thread Starter
|
Registered User
Joined: Feb 2014
Posts: 24
Likes: 0
From: Maryland
Default

what about this?
http://www.summitracing.com/parts/mp...sion/automatic
 
Reply



All times are GMT -4. The time now is 01:44 AM.