3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2006 Ram SLT Hemi Exhaust

Thread Tools
 
Search this Thread
 
  #61  
Old 04-18-2007 | 02:28 PM
HighDuke1911's Avatar
HighDuke1911
Champion
Joined: May 2006
Posts: 4,616
Likes: 0
From: San Diego
Default RE: 2006 Ram SLT Hemi Exhaust

sweet thank you! now thats exactly what i needed sir! lol. im printing this page out right now so i can remember this stuff without searching for this thread. lol.
 
  #62  
Old 04-18-2007 | 02:30 PM
HighDuke1911's Avatar
HighDuke1911
Champion
Joined: May 2006
Posts: 4,616
Likes: 0
From: San Diego
Default RE: 2006 Ram SLT Hemi Exhaust

ORIGINAL: Pappy_FB

This is an outside clip from about 2 feet away from exhaust tip.

Man I should have left off that rear resonator!

LoL

http://s155.photobucket.com/albums/s...artIdleRev.flv

Gonna get the wife to help with a drive by cliplater today.
did you get that drive-by clip yet? i wanna see her shoot ya! lol. jk. but yeah, did you do it though?
 
  #63  
Old 04-19-2007 | 06:24 AM
ThaChad's Avatar
ThaChad
Professional
Joined: Apr 2007
Posts: 161
Likes: 0
From:
Default RE: 2006 Ram SLT Hemi Exhaust

ok so I crawled under the truck today (2006 1500 MegaCab 4x4), and Found there is only 2 Resinator, the Rear one behind the Muffler. The only thing infront of the Muffler is the 2 CAT's. Why would some have 2 Resinator's and some only 1?

I wanted to do a Dual Exhaust out the back, but I found out that the OE pipes are Mandrel bent, and Stainless Steel. So I'd be kind of stupid to pay $500 for a Cat-Back kit which is going to replace the OE Stainless Mandrel Bent, with Aftermarket Stainless Mandrel Ben Accomplishing nothing. However None of the local shops can do Mandrel Bent or Stainless pipes, So My delema comes in on how I'm going to get duals out the back!?

My options are:

$150 - 50 Series HD Muffler
$30 - Install, Leave all factory Piping
----------------------------------------
$180 Total

OR

$150 - 50 Series HD Muffler 1-in, 2-out
$100? - Compression Bent Aluminized Piping to Dual-Rear Exit,
$50 - Stainless Tips
----------------------------------
$300 Total

OR

$500 Flowmaster Kit - Mandrel Bent aluminized piping from Cats-Back w/ 50 Series HD muffler, and Stainless Tips.


Basically I feel I'd be dumb to replace Stainless Mandrel bent with Aluminized Mandrel bent, But I have no other way to get Mandrel bent piping from the Muffler back.

I really prefer the Dual Rear Exit look over the factory dump behind the rear tire.

Help?

-ThaChad
 
  #64  
Old 04-19-2007 | 04:37 PM
HighDuke1911's Avatar
HighDuke1911
Champion
Joined: May 2006
Posts: 4,616
Likes: 0
From: San Diego
Default RE: 2006 Ram SLT Hemi Exhaust

option #1... im doing #1, pappy did #1 and TRHemi i believe did it too. itll cost less and be just as good. you can take off a resonator if you want i guess. itll be louder. so, what i heard, is that if you take off the res, you get a louder exhaust, take off both and its even louder. so its up to you now. i think im gonna leave them both on. when i want it louder, ill take one off.
 
  #65  
Old 04-20-2007 | 03:41 PM
Pappy_FB's Avatar
Pappy_FB
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,283
Likes: 0
From: Florida
Default RE: 2006 Ram SLT Hemi Exhaust

ORIGINAL: HighDuke1911

ORIGINAL: Pappy_FB

This is an outside clip from about 2 feet away from exhaust tip.

Man I should have left off that rear resonator!

LoL

http://s155.photobucket.com/albums/s...artIdleRev.flv

Gonna get the wife to help with a drive by cliplater today.
did you get that drive-by clip yet? i wanna see her shoot ya! lol. jk. but yeah, did you do it though?
HighDuke,
Nah, I travel alot (commericial flights)for work so I have not gotten a chance to do the drive by. Also My Sister in Law has been visiting here fir 2 weeks and we take her back this weeknd. So another 1450 mile round trip. This time I am de-tuning the truck to use 86 Octane. I will also obey the speed limits in Georiga! LoL

TheChad,
Resonatorsare used to reducein-cab drone. I like the "Stock look" so when you look at my truck from the back you see the stock tail pipe and resonator.
Again I am likingmy setup,you can still hear each other talk. But I am old. LoL
My concernwith removing a resonator would bethe MDS with my setup you really have to listen for it. Remove a resonator and who knows what it will sound like.
If you want more sound I would recommend removing the rear resonator as it is farthest away from the cab.
 
  #66  
Old 04-20-2007 | 04:16 PM
Midnight Runner's Avatar
Midnight Runner
Champion
Joined: Feb 2007
Posts: 2,612
Likes: 0
From: Palm Beach, Florida
Default RE: 2006 Ram SLT Hemi Exhaust

ORIGINAL: Pappy_FB

Thanks Pirata.

I did make some video "with audio"clips of the after muffler was installed.

But I am telling the truth when I say I turned on the AC crusing at 75 MPH and could hear the fan whispering away. There was no exhaust drone.

If I open up the rear slider window you can hear the faint throat-e-ness of the exhaust.

This is a videoof medium acceleration. Kinda Throaty
All windows were up and no AC or Radio. The clicking noise was the camera strap hitting the camera.
http://s155.photobucket.com/albums/s...ent=MedAcc.flv
That's a real nice truck. A guy i know has one. I like it.
 
  #67  
Old 04-21-2007 | 12:00 AM
lakeozarkman's Avatar
lakeozarkman
Joined: Apr 2007
Posts: 14
Likes: 0
From:
Default RE: 2006 Ram SLT Hemi Exhaust & McGauhy's lowering kit

Ok, I have a New Inferno Red Ram 4X4 Hemi 1500 and I just had a new 70 series Flo-master installed today and removed the resinator and dualed it out the back with turn downs, it absolutly sounds great, not real loud but a nice rumble with very little noise in the cab. Then I put a McGaughy's 2"-4.5" Deluxe Drop Kit, it lowered my Front end 1-1/2 inches and the back came down a full 4 inches and now I can get in and out without a latter and it sounds great, I love it, and most important after I lowered it, I went to the front end shop for a alignment check andit was towedend 4.75 degrees, that's a bunch, (would have worn out the front tires in a couple thousand miles)Needless to say I'm very happy I checked for alignment, got it set perfect and now completely happy. Hope this will help someone doing a lowering kit, Good Luck, Lakeozarkman

[IMG]local://upfiles/60228/DE70AA266494434E8E2FD0A97A548D3B.jpg[/IMG]

[IMG]local://upfiles/60228/F5D8DE0BDE824E3EB246B306387D353F.jpg[/IMG]
 
  #68  
Old 04-21-2007 | 12:06 AM
Pappy_FB's Avatar
Pappy_FB
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,283
Likes: 0
From: Florida
Default RE: 2006 Ram SLT Hemi Exhaust & McGauhy's lowering kit

Lakeozarkman,

How does it sound when the MDS kicks in?

Make us a sound sound clip.

That is an Awsome lookin Truck to boot!
 
  #69  
Old 04-21-2007 | 12:47 AM
lakeozarkman's Avatar
lakeozarkman
Joined: Apr 2007
Posts: 14
Likes: 0
From:
Default RE: 2006 Ram SLT Hemi Exhaust & McGauhy's lowering kit

Pappy, It sounds like shix when it kicks in so, if I'm somewhere I don't want anyone to hearit, I push the Trailer haul mode button and it kits it down a gear and sounds much better. I think I can live with it, I'll try and make a video chip next week thanks, lakeozarkman
 
  #70  
Old 04-21-2007 | 02:19 AM
Pappy_FB's Avatar
Pappy_FB
Thread Starter
|
Record Breaker
Joined: Apr 2007
Posts: 1,283
Likes: 0
From: Florida
Default RE: 2006 Ram SLT Hemi Exhaust & McGauhy's lowering kit

Hereare the Underside Pics I took during the Install.

Hope this helps a little

[IMG]local://upfiles/59926/CF3DF4A0D0F647F0A9A833FCD515F1A5.jpg[/IMG]

[IMG]local://upfiles/59926/3E33A35C2ABA4BE6904BBDCF0516784A.jpg[/IMG]
 


Quick Reply: 2006 Ram SLT Hemi Exhaust



All times are GMT -4. The time now is 05:23 PM.