3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Finally installed the Borla on the 4.7l

Thread Tools
 
Search this Thread
 
Old Apr 7, 2007 | 01:30 AM
  #1  
neveuxpr's Avatar
neveuxpr
Thread Starter
|
Amateur
Joined: Mar 2007
Posts: 46
Likes: 0
From: MA
Default Finally installed the Borla on the 4.7l

Well after much debate, I decided to go with a Borla muffler. I got the ProXS series 14" and had it welded in along with a 2' piece of stainless pipe where the old tank of a muffler was. This muffler sounds great and you definitely know it's there as soon as you start the truck. It sounds great at idle and even louder when you give it the gas. A bit loud at the peak of gear changes but very tolerable at cruising speed and will not give you a headache. I paid 75.00 to have the muffler welded in, 40.00 for 2' of stainless pipe, 90.00 for the Borla, and 30.00 for a nice 4" stainless tip. All said and done, it cost me 235.00 for an entire stainless setup and gives a loud roar!
 
Reply
Old Apr 7, 2007 | 03:11 AM
  #2  
pakaalbite's Avatar
pakaalbite
Professional
Joined: Dec 2006
Posts: 227
Likes: 0
From:
Default RE: Finally installed the Borla on the 4.7l

sound clip?
 
Reply
Old Apr 7, 2007 | 09:07 AM
  #3  
neveuxpr's Avatar
neveuxpr
Thread Starter
|
Amateur
Joined: Mar 2007
Posts: 46
Likes: 0
From: MA
Default RE: Finally installed the Borla on the 4.7l

not yet, going to have to see what I can do with the digital camera
 
Reply




All times are GMT -4. The time now is 07:44 PM.