3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Vibration

Thread Tools
 
Search this Thread
 
Old Sep 8, 2004 | 09:03 PM
  #1  
ChrisJ's Avatar
ChrisJ
Thread Starter
Joined: Sep 2004
Posts: 2
Likes: 0
Default Vibration

I have a 2004 Dodge Ram QC 4x4 Laramie with the AWD option and 20" wheels. When I accelerate hard I get a major vibration from 50 km's to 80 km's I took it to the dealer and they said everything appeared to be okay but it's not. Does anyone have this or had this problem?
 
Reply
Old May 2, 2005 | 12:02 AM
  #2  
Dodgeramman05's Avatar
Dodgeramman05
Rookie
Joined: May 2005
Posts: 66
Likes: 0
From:
Default RE: Vibration

i had the same problem with my dodge ram and when it got to atleast 40mph to about 65mph got bad vibration had the wheels rebalenced and it wasnt the problem so i check the universal joint on the rear of the drive shaft and it was froze solid but we couldnt tell untill we pulled out the drive shaft we replaced the u joint and it solved the problem





p.s. if it is the problem replace the u joint with a u joint with grease fitting
 
Reply




All times are GMT -4. The time now is 08:44 AM.