Are you going to get these too? Let me know if you do, I want pics of someone with real HID projectors.

http://cgi.ebay.com/ebaymotors/02-05...spagenameZWDVW

 

BighornHemi got some. Go here. https://dodgeforum.com/m_842409/tm.htm it's still on the first page under "pics of my truck"

 

Thanks, too bad he doesnt have night pictures in his gallery.

 

Did you click that link? He's got a night shot further down in the thread

 

My bad. I clicked on his album on the first post. Looks really nice. Even halos on the fogs.

 

ok i tried searching the company and can't find anything

chopper, mine look alot like yours, i can take some pics in a little bit and post them up. My tail lights have 3 wires coming out of them, hopefull i can get by with a 2 wire load equilizer and not have to purcahse a 3 wire like pappy said.

 

ok i snapped a couple pics of what i got....



[IMG]local://upfiles/16816/C7E73EF2E51D4BF58004B24001C7A27C.jpg[/IMG]

[IMG]local://upfiles/16816/E24F6AFE56E74DFA87A79C489873C1C3.jpg[/IMG]

 

Hanson,
This is the one I used, but it was for my Rear Turn Signals only (single function for two sides).
It's basically the same thing you have pictured just in one unit+ acommon ground.

I know they make a Run/Turn/Stop setup also. (3 function)

The ones you have are inline single function. So they will only provide LEQ forone thingon one side (i.e. Runnig Light, Turn Signal, or Brake Light, me thinks) Unless you can splice in prior to the split for Running or Brake Lights.

Did you only get 2 as in yer pic or 4 or 6?

If yer Tail Lights have 3 wires its prolly
Running Light / Brake Light / Turn Signal (with some kind of commn housing ground maybe)

Need pics of Tail Light wires and yer truck Stock Connector (How many wires on each side)

Turn Signals will be on different circuits form a relay (two wires)
Running Lights should/could be the same for both Tail Lights (one wire split into two)
Brake Lights should/could also be the same for both Tail Lights (one wire split into two)
That doesn’t mean that the split is near the bumper it mightsplit way up front in the harness somewhere.

[IMG]local://upfiles/59926/AEE12B962B4E4E8C8A6197CC5319A4F2.jpg[/IMG]

 

the tail lights i have should be constantly on when my headlights are on, and flash when i hit the brake lights. The leds have 3 wires, one ground, one running, and one brake im assuming. Yes i did only order 2, i figured i'd start with that, if they are right and worked and i need more i will order more, just kinda wanted to try to get something operating correctly.

 

Hanson,
I am sorry for being a dumb a$$. forgive yer ol Pappy.

After re-reading the post, I think I understand.

If you can nail down which wire is ground you should have this thing whipped. (black or white if those are availiable choices)

Put an inline LEQ on the other two lines and give it a shot, it should work. if not try just one LEQ on one line.

If I was there we could at least drink beer point and cuz at it.