3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Keeping Factory Deck

Thread Tools
 
Search this Thread
 
Old Jul 24, 2007 | 11:36 AM
  #1  
bigblacktruck07's Avatar
bigblacktruck07
Thread Starter
Joined: Jul 2007
Posts: 11
Likes: 0
Default Keeping Factory Deck

Hi guys, i need heep with installing after market amps and after market speakers in my 2007 dodge ram 1500 Laramie,i really want to keep the factory deck b/c i have Uconnect and Sat radio. I know that i have to cut into the exisiting wires from the amp. My problem is i can't get to the factory amps, the air box is in the way. i don't know how to remove it. can anyone help me.

Thanks
Jay
 
Reply
Old Jul 24, 2007 | 12:51 PM
  #2  
bigblacktruck07's Avatar
bigblacktruck07
Thread Starter
Joined: Jul 2007
Posts: 11
Likes: 0
Default RE: Keeping Factory Deck

really need help!
 
Reply
Old Jul 24, 2007 | 01:00 PM
  #3  
cobra2411's Avatar
cobra2411
Amateur
Joined: Jul 2007
Posts: 34
Likes: 0
From:
Default RE: Keeping Factory Deck

Air box? As in AC box? I haven't looked at one, but in my other cars, you need to disconnect the AC system to get it out...

Do you have a shop manual? Go to the part store and thumb through it to make sure it lists removing the AC box. The partstore manuals have really gone down hill.


 
Reply
Old Jul 24, 2007 | 01:21 PM
  #4  
bigblacktruck07's Avatar
bigblacktruck07
Thread Starter
Joined: Jul 2007
Posts: 11
Likes: 0
Default RE: Keeping Factory Deck

i've tried to look for a manual, but they told me that there isn't any for the 2007or 2006. its the air/ac box it's on the passenger side, behide the glove box. i have it open, but i don't want to mess anything up, b/c there's lots of wire and connections.
 
Reply
Old Jul 24, 2007 | 01:42 PM
  #5  
07 Ram TRX4's Avatar
07 Ram TRX4
Captain
Joined: Jul 2007
Posts: 736
Likes: 0
From:
Default RE: Keeping Factory Deck

Next best thing... goto the dealership and ask the service or the parts guys... I'm sure someone there will know...
 
Reply
Old Jul 24, 2007 | 01:54 PM
  #6  
Sir Hardin Thicke's Avatar
Sir Hardin Thicke
Record Breaker
Joined: May 2007
Posts: 1,211
Likes: 0
From: Levittown, PA
Default RE: Keeping Factory Deck

If the amp is in the same place as it is was in my 04, good luck.
Grab yourself a 10mm wratcheting box wrench and prepare to make 1/16th turns with it. It's a slooooooooow (and sharp) process. Your other option is to pull out the air box.
 
Reply
Old Jul 24, 2007 | 02:36 PM
  #7  
djr04's Avatar
djr04
All Star
Joined: Jul 2006
Posts: 807
Likes: 0
From: South Dakota
Default RE: Keeping Factory Deck

Go to hemitruckclub.com and click the download link for the service manual on the left. That should give you all the information you need, plus tons of other stuff.
 
Reply
Old Aug 1, 2007 | 08:14 PM
  #8  
bigblacktruck07's Avatar
bigblacktruck07
Thread Starter
Joined: Jul 2007
Posts: 11
Likes: 0
Default RE: Keeping Factory Deck

Anyways boyz, i figured that this is just awaste of time, so i went and bought a Pioneer AVIC-D3, and i'm installing in the truck! what do you think? i'm running 2 JL's 250/1 and 300/4, interior speakers are Inifinty Kappa's, and a JL Stealth Box with 1 10w3?
 
Reply




All times are GMT -4. The time now is 01:31 AM.