3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

4X2 TO 4X4 CONVERSION

Thread Tools
 
Search this Thread
 
  #1  
Old 08-13-2007, 04:51 AM
HEMICROSS's Avatar
HEMICROSS
HEMICROSS is offline
Thread Starter
Join Date: Aug 2007
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 4X2 TO 4X4 CONVERSION

ok, getting sick of my 2wd and need 4wd, i don't want to trade it in for a new one or buy a used one thats a 4x4 i want to convert the truck I have now, I have a 2004 QC Hemi short box and I need to know what all i need to make it a 4x4 i heard you can take the whole front diff. assembly and it will bolt up to the 4x2, but I don't kn ow what to do about the transmission, there are so many different codes and manual shift and electronic, I don't know what they are talking about, can I just get the transfer case and that adaptor or do I have to replace the whole transmission?
 
  #2  
Old 08-13-2007, 05:38 PM
G0tMudd's Avatar
G0tMudd
G0tMudd is offline
Veteran
Join Date: Mar 2007
Location:
Posts: 361
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4X2 TO 4X4 CONVERSION

I'm not totaly good with this buti i belive you need to go find a Soild front axel that was off a 4x4 and u need to pick up a trasnfer case. Drill a shaft for the 4x4 rod brake lines everything. All i have to say it u will send WAY more making it a 4x4 then if u trade it in.
 
  #3  
Old 11-12-2007, 12:37 PM
Cowgirl4christ's Avatar
Cowgirl4christ
Cowgirl4christ is offline
Professional
Join Date: Jul 2007
Location:
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4X2 TO 4X4 CONVERSION

Actually all you have to do is find a wrecked dodge like your year model and basically swap out everything on the wrecked Dodge's front; as in all of the steering components, etc and replace them on yours. If you work on it all day, you could finish it in a weekend. This is what I am plannin on doin to my Dodge. It beats havin to put it in the shop and payin way too much for it...
 
  #4  
Old 11-12-2007, 01:51 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default RE: 4X2 TO 4X4 CONVERSION

Ya if you could find a wrecked 4x4 and swap parts. Or even easyer swap frames. Thats what I did. I just bought a rollover. The body was shot but frame perfect. I swaped the frame keeped my body and engine. It took me a weekend to do it. The body mounts location should be the same. It bets buying a new 4x4.
 
  #5  
Old 11-16-2007, 11:38 AM
Cowgirl4christ's Avatar
Cowgirl4christ
Cowgirl4christ is offline
Professional
Join Date: Jul 2007
Location:
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4X2 TO 4X4 CONVERSION

Hmm.. I never really thought of that.. Good idea! How much did it cost you overall?
 
  #6  
Old 11-16-2007, 09:45 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default RE: 4X2 TO 4X4 CONVERSION

It cost me $1,100 for the entire truck complete execpt for the engine. I had a better one a 5.9 than the stock 5.2. That was everything From tranny transfercase (which were rebuilt 200miles beforeit waswrecked!)everything! I even took the seatbelts and other stupid things. I thought might as well, one day mine will go out! The best part was the junkyard came and picked up my scrap frame and the bad body and bed when I was done. All trash when I was done with it. This is the best thing I did to my truck!The 5.9 is close but 4x4 justis better. Just add another 100 or so for fuilds and another 300 to upgrade the front axle to 3.9 gears to match the rear. So When all done it came out to $1,500 or so! That sure beats $5,000 and upfor another truck!
 
  #7  
Old 12-19-2007, 01:07 AM
flyboy1304's Avatar
flyboy1304
flyboy1304 is offline
Veteran
Join Date: Jun 2007
Location: oklahoma
Posts: 321
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4X2 TO 4X4 CONVERSION

Not sure how difficult it is on a full sized truck... But back in high school my friend wanted to convert his 2wd jeep charokee to 4wd. it took him 2 days in shop class. The wrecked jeep even had a 5.5" lift kit. so he threw that on there too. he said it was fairly easy to do. and he bought the wrecked jeep for only $75. plus the cost of new rancho shocks all around. Not bad i would say. Good luck with your build
 
  #8  
Old 09-09-2012, 10:15 AM
ol'blue91's Avatar
ol'blue91
ol'blue91 is offline
Registered User
Join Date: Sep 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I've got an 04 ram 1500 QC what are the years that would be compatible to do this swap on my truck
 
  #9  
Old 09-09-2012, 05:43 PM
HemiLonestar's Avatar
HemiLonestar
HemiLonestar is offline
Banned
Join Date: Nov 2005
Location: MD
Posts: 3,740
Likes: 0
Received 7 Likes on 7 Posts
Default

5 YEAR OLD THREAD RESURRECTION!!
02-05 would be compatible.
 
  #10  
Old 09-10-2012, 07:21 AM
ol'blue91's Avatar
ol'blue91
ol'blue91 is offline
Registered User
Join Date: Sep 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the help
 


Quick Reply: 4X2 TO 4X4 CONVERSION



All times are GMT -4. The time now is 11:22 AM.