Because the only place the two reservoirs mount is to the shroud, so you have to end up modifying it one way or another. On the Monday after, I found a post on the boards and saw that they had drilled holes into the top and bottom lips of the rad and mounted it there, then notched the shroud around the brackets/mounts.

Myself, I drilled holes on the top and bottom of the shroud, and used threaded rod to place the fan where I wanted. The bulk of my time was spent trying to find a way to get around having to put the stock shroud on because it looks so much better without it. Once I decided I couldn't do that, the whole thing only took maybe 2 hours. I'm currently searching for aftermarket reservoirs so I can pull the shroud off.

Long story short, I'm just slow [sm=smiley1.gif]

 

i had the most fun driving in the rain in a looonnnngggg time !! gotta love drifting

 

Sounds like someone was playing in the mud...or is now looking for new tires

 

hehehe BOTH!!!

 

Cut off the exhaust- worked on scaring the neighbors - got yelled at by my wife - welded part of the exhaust back on. ...wiating for the UPS man to show up with the rest of the parts for FrankenRAM... I think I'll buy him a beer. He's better than ole Chris Cringle...

 

cut a pioneer avic-d3 into the dash of my '05! i'll finish the trim, bondo, and texture on the bezel sometime this week

[IMG]local://upfiles/62841/BA47AED1DACA4BCE9A6E99F189C0F477.jpg[/IMG]

[IMG]local://upfiles/62841/A0643945BCE3460A85541816EDECDFF1.jpg[/IMG]

 

washed it, poured 11oz of Stab-bil in gas tank, filled up tank, and finally put cover on it....it's gonna be a long winter ...least i get to play in my ramcharger more now tho

i thought the e-fan install was very easy...didn't have to mess around with the coolant or washer reservoir, stayed in the same location as before....different story here next spring when i get rid of the stock shroud and replace the reservoirs

 

Magnaflow stainless cat-back, Jetstream scoop and power wire.

 

Ordered extend-a fender flares for truck and ordered a mag-hytec transmission cover

[IMG]local://upfiles/78165/F2A6B38A060C4AF499911BA9EF1A6D26.jpg[/IMG]

 

Trueflow 30502 intake kit.