3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bully Dog Power Pup

Thread Tools
 
Search this Thread
 
Old Sep 28, 2007 | 10:00 AM
  #1  
redram07's Avatar
redram07
Thread Starter
|
Amateur
Joined: Jul 2007
Posts: 44
Likes: 0
From:
Default Bully Dog Power Pup

I read an article in some sport truck magazine about the Bully Dog power pup module for the Hemi. It showed dyno results of 25hp at the wheels.
Any opinions on this product?
How does it work with the 07 Hemi with the MDS? Test was on an 06 Hemi, which I believe also came with the MDS although the article did not mention it. The Bully Dog website also only went up to 2006 year with no mention of the MDS.
Of other interest in the article, it stated that the rear wheel hp of the Hemi on the dyno was only 211. Is it just me or does this seem low to anyone else?

I am still working on posting pics of my truck.


 
Reply
Old Sep 28, 2007 | 06:44 PM
  #2  
djr04's Avatar
djr04
All Star
Joined: Jul 2006
Posts: 807
Likes: 0
From: South Dakota
Default RE: Bully Dog Power Pup

The 07's are different than the 06's when it comes to programmers. It took Superchips a while to release an update to support the 07's due to some differences in the pcm (not sure what). I have heard though that the MDS hemis dyno lower than the earlier hemis (I have heard about 240 hp as opposed to the ~270 hp on the non mds). If this is true, I would guess it is due to a modified cam to make MDS operate properly.
 
Reply
Old Sep 29, 2007 | 05:04 PM
  #3  
Willster172's Avatar
Willster172
Joined: Sep 2007
Posts: 2
Likes: 0
From:
Default RE: Bully Dog Power Pup

I have a 2004 Ram 1500 Hemi With the power pup and I love it. I have noticed a lot of low end and mid range power increase. I also noticed about a 3-4 mile to the gal. increase around town.I am ordering Edelbrock headers today, hope this helps.
 
Reply




All times are GMT -4. The time now is 03:52 PM.