3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Coil Springs

Thread Tools
 
Search this Thread
 
Old Oct 23, 2007 | 09:53 AM
  #1  
Lama's Avatar
Lama
Thread Starter
Joined: Oct 2007
Posts: 19
Likes: 0
From:
Default Coil Springs

What is the difference between the front suspension on my 05 Hemi Ram Q.C. 1500 4x4 and my friends 06? (same truck)
His front shocks are inside coil springs and I don’t have coils springs, just the shocks.
What’s the difference between the 05 and 06 front suspension?
 
Reply
Old Oct 23, 2007 | 10:48 AM
  #2  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default RE: Coil Springs

You have a torsion bar, he has coil springs. The following definitions are from Wikipedia online encyclopedia:

A torsion bar suspension is a general term for any vehicle suspension that uses a torsion bar as its main weight bearing spring. One end of a long metal bar is attached firmly to the vehicle chassis; the opposite end terminates in a lever, mounted perpendicular to the bar, that is attached to a suspension arm, spindle or the axle. Vertical motion of the wheel causes the bar to twist around its axis and is resisted by the bar's torsion resistance. The effective spring rate of the bar is determined by its length, diameter and material.
The main advantages of torsion beam suspension are durability, easy adjustability of ride height, and small profile along the width of the vehicle.
In most torsion bar systems, especially Chrysler's, ride height (and therefore many handling features) may be adjusted by bolts which connect the torsion bars to the steering knuckles and require nothing more than crawling under the car with a wrench in hand.

A Coil spring, also known as a helical spring, is a mechanical device, which is typically used to store energy and subsequently release it, to absorb shock, or to maintain a force between contacting surfaces. They are made of an elastic material formed into the shape of a helix which returns to its natural length when unloaded. Coil springs are a special type of torsion spring, the material of the spring acts in torsion when the spring is compressed or extended.
Many types of coil spring are wound in an annealed (soft) condition and then tempered to achieve their strength as a spring. Over time, this tempering can be lost and the spring will sag because it can no longer withstand the loads applied.
 
Reply
Old Oct 23, 2007 | 11:18 AM
  #3  
tdmopar59's Avatar
tdmopar59
Grand Champion
Joined: Feb 2007
Posts: 5,704
Likes: 0
From: Warminster, PA
Default RE: Coil Springs

uh oh hammer... are you goin down hankL street!!
 
Reply
Old Oct 23, 2007 | 12:37 PM
  #4  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default RE: Coil Springs

Not at all, and shame on you for even making the insinuation! [:@]

It was simply easier to cut and paste than to type! and I had to give credit lest I be accused of plagiarism!
 
Reply
Old Oct 23, 2007 | 12:53 PM
  #5  
tdmopar59's Avatar
tdmopar59
Grand Champion
Joined: Feb 2007
Posts: 5,704
Likes: 0
From: Warminster, PA
Default RE: Coil Springs

lol true....!
 
Reply
Old Oct 23, 2007 | 01:51 PM
  #6  
Lama's Avatar
Lama
Thread Starter
Joined: Oct 2007
Posts: 19
Likes: 0
From:
Default RE: Coil Springs

Thanks for the excellent explaination.
 
Reply




All times are GMT -4. The time now is 02:41 PM.