Alright, 2004 Ram 1500 QC 4.7L 4x4.

Right now i have a Super 44 series muffler single in dual out 2.5". I have to 90's dumpin out.

What i would ultimately like to do is make my own Gibson Super Truck exhaust; but not in front of the rear wheel. I want to run it behing the rear wheel like a stock exhaust.

Basically what im asking is, w/o taking off the spare, can two 2.5" pipes fit side by side until i bend a 90 to make the come out the side.

I fould dude on eBay that has two Passenger side pipes avail and i will make the final bend myself

 

depends on what side you want it to come out on. I will tell you they will not fit if you point them towards the drivers side.
Why not run 1 pipe out each side?

 

Check out an SRT-10 exhaust system - exactly what you are talking about only turning the pipes at the end.... I'm planing on doing the same thing -

 

i run the gibson super truck on my 07 2wd sb.absolutely love it.try performance products@1-800-752-6268.ask for frank@ext 7608.i got mine via fed ex to the door for 292.00.you cant go wrong with these people.by the way avoid rpm putlet .com@ all costs.will never do another $1.00 of business with them.good luck with your projectand hope you find what you're looking for at the best price possible.and yes by the way you will have problem with the spare because of clearance .dont worry it sounds bitchin and only takes about 45min to put on.youwill not be disappointed in this ehaust!

2007 1500 2wd reg cab sb
gibsonsuper truck exhaust
helix power tower throttle body spacer and inlet tube
(street and perfomance elctronicsnorth little rock arkansas)
airmax cai(street and performence electronics)
super chips 3815 on 91 oct tune

 

I have 2.5", side by side on passenger side. However, it splits and exits out the rear.

 

Look at the daytona ram's it's seem's like that's what your looking for.

 

it sounds to me like hes trying to do the daytona style as well... if you have the equiptment you can do just about anything with exhaust.. if not you can take it to a shop explain what you want and they can do it.. might hurt the bank a little more though..