Hellow everyone,

I'm brand new to the forum, I'm looking forward to hearing some of your responses. My uncle told me that there is a way to by-pass the seat belt chyme on my 2007 Dodge Ram, does anyone know the prosedure to do this?

 

Yep, it can be done, the process is in a pamphlet, it was in my glove box when I bought the truck. I've done it, but can't remember from memory how to do it.

 

he's right...its in the owner manual... it will stop the dinging.. but the light will still light up and flash.... but better yet... wear your seatbelt....

 

Try this...... After doing this the light will stay on, but the dinger won't ding.
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the programming to be completed successfully.
[ol][*]With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat belt.[*]Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds).[*]Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.[*]Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.[/ol]

 

Thanks Parts/Service, worked in the wifey's 08 Chrysler. I always wear my seatbelt but unbuckle it to get the mail at the end of the driveway. The dinger would start dingin before I got into the garage, drove me nuts.

 

Thanks for the tips, I will try this when I get home from work tonight.