3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Wagner Brake Pads

Old Jan 6, 2008 | 03:57 PM
  #1  
tdmopar59's Avatar
tdmopar59
Thread Starter
|
Grand Champion
Joined: Feb 2007
Posts: 5,704
Likes: 0
From: Warminster, PA
Default Wagner Brake Pads

Just put on my new severe duty brake pads from wagner... ordered em from rock auto at a pretty good price i think like 40 or so.... the rotors werent to bad but the brake pads looked like crap... so i sanded and cleaned the rotors put on the new pads and WOW they are some great pads! the truck stops great its quiet and i'm lovin it!! so for any one in the market for brake pads i reccomend these wagners...

Thanks JimmyD for the reccomendation
 
Reply
Old Jan 6, 2008 | 07:11 PM
  #2  
John  M's Avatar
John M
Record Breaker
Joined: May 2007
Posts: 1,152
Likes: 2
From: Milledgeville, GA
Default RE: Wagner Brake Pads

I just bought their Edge series pads from the local OReilly Auto Parts. My brakes have been squeaking for a while so I figured it's time for new pads.

Popped the wheel off this afternoon to see the current pads are 90% new. So, being the lazy type, I put the wheel back on and saved the pads for later on.
 
Reply
Old Jan 6, 2008 | 07:22 PM
  #3  
tdmopar59's Avatar
tdmopar59
Thread Starter
|
Grand Champion
Joined: Feb 2007
Posts: 5,704
Likes: 0
From: Warminster, PA
Default RE: Wagner Brake Pads

if your breaks are squeaking... check out the rotors you might have to sand em a lil bit... and check the pads too.. they're prolly glazed...
 
Reply
Old Jan 6, 2008 | 09:14 PM
  #4  
hemiyellow's Avatar
hemiyellow
DC Insider
Joined: Aug 2005
Posts: 2,681
Likes: 1
From: cedar falls, ia
Default RE: Wagner Brake Pads

yeah i got newcalipers with padsandslotted rotors, but i'm waiting till spring gets here to put em on...glad you like the wagners tho, havent heard much about them
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:06 PM.