v8 to v10
ok i have some questions i need answered i have a 2004 dodge ram 1500 4.7 L v8 and my boss just rolled his 2004 srt-10 ram he offered me the truck as a bonus for my plumbing sales this month but my question is can i put the srt-10 motor in my 2004 dodge ram 1500? please lmk asap.
~BOB
[/align]
Bob, I believe that it can be done. But you will need the engine, transmission, all wiring for both and the powertrain control module. There may be a few other things that you will need and I am sure others will jump in with advice......
Not worth the trouble. Lots more to the SRT than the engine/tranny. You would want the entire drivetrain, computer system,suspension (including steering), brakes and cooling system. Then at that point you would have somewhat of a safe truck, but still missing the interior, wheels, tires, hood, bumpers and ground effects, which I will assume is mostly a loss.
I would pull the interior out of it(if not blood stained)and put it in your truck and sell of the other parts for whatever you can get. If the engine/tranny is good you should be able to get 8K give or take a few.
On a side note, another one bites the dust. You can just about find 1 post like this per week on the net. Keep smashing them up, only helps me in the long run.
I would pull the interior out of it(if not blood stained)and put it in your truck and sell of the other parts for whatever you can get. If the engine/tranny is good you should be able to get 8K give or take a few.
On a side note, another one bites the dust. You can just about find 1 post like this per week on the net. Keep smashing them up, only helps me in the long run.
Don't forget, if the truck was rolled there is a chance of engine damage also if it ran upside down due to oil issues. I have always been told to never buy an engine out of a rollover vehicle because you never know how long it ran upside down.
There is always a chance you are gonna take one unuseable truck and add one useable truck and end up with two unuseable trucks when all is said and done...
Trending Topics
ORIGINAL: rebelbob
ok i have some questions i need answered i have a 2004 dodge ram 1500 4.7 L v8 and my boss just rolled his 2004 srt-10 ram he offered me the truck as a bonus for my plumbing sales this month but my question is can i put the srt-10 motor in my 2004 dodge ram 1500? please lmk asap.
~BOB
[/align]
ok i have some questions i need answered i have a 2004 dodge ram 1500 4.7 L v8 and my boss just rolled his 2004 srt-10 ram he offered me the truck as a bonus for my plumbing sales this month but my question is can i put the srt-10 motor in my 2004 dodge ram 1500? please lmk asap.
~BOB
[/align]
well the truck starts and runs smooth still moves but has flat tires i just need to know if its possible and interior firs cuz i already installed the motor is next so let me know if it works
[/align]
it's possible if you want to invest the time and money to do it...personally, if you want a srt-10 then fix the wrecked one you have or part it out and sell your truck and then go buy one....too much work for somethin like that



