i got a good idea. show how much power your hemi or 4.7 has in your truck.

leave comments how you did to increase power. this is good one for noob who wants to see how the intake increases and stuff.

my friend has rumble bee with 520 hp with about 550 tq.

and vote that is close to your engine spec.

 

How does he know it's got 520hp?

 

his father is an mechicanic and he dynoed

 

I was throwing down 480 after the supercharger, exhaust, and the tune package, injectors, fuel pump, ignition upgrades, basically everything, but have not run it since the cam was put in with tune. I'll find out in the spring.

 

mine wasnt on ur chart but i have an o7 2wd sb auto w/ 3:92 rear.after intake,exhaust,t-body spacer and sc 3815 and a little tune from my mopar bud mech 2 enhance everything she's putiing 302.46 hp and 314.28 tq to the ground on 91 oct fuel.i know they advertise 345/375 but thats at the crank.this istrue hp/tq on a dynojetdynometer.not bad i guess and still get around 18 mpg in the cold.should get better when temps warm up.thinking about a jet stg 2 and stat 2 c if there is any diff.if not headers r next when i can afford it.

 

425hp and 798tq out of my inline 6. I could probably push close to 475hp but my clutch is already hating life as is.

 

Not enough.

 

Please, if you post results only post if you had it on a dyno. This is only helpful to other members if it is factual numbers and not "added numbers" like the following....

CAI and Exhaust on a Hemi does not mean 345HP + 20HP for the CAI + 20HP for the cat back exhaust=385HP.... Manufacturer claims are always inflated.

Since you had it on a dyno your numbers should be RWHP, which the Hemi has 250-260 out of the box based on a recent post.

 

whoa is your truck CTD?

 

Yes it is.