When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
SPindles are the best way to go since the Control arms will not be moved from the original Position.The truck would also be alot easier to align with spindles than a spacer,you wont have the outer part of your tire going bald.Spindles will give the suspension better room to travel on a big bump as for spacers,as soon as it maxes out its flexibility,you will put alot of stress on the A arm and possibly hit the A arm to the spring bucket above.
The factory 17' will thats what i had on my truck when i forst put on the leveling kit, i had no problem with my factorys at all.it depends on what back spacing you need